Heatshrink Sleeves & Tubing
Our Heat Shrink Sleeves & Tubing are manufactured using a premium quality Polyolefin Thermoplastic which is what gives this product its shrinking properties when moderately heated. Commonly used to insulate, protect and conceal applications such as cables inside wiring systems, Heatshrink Tubing is an easy to use product that is perfect for such uses. Employed mainly inside Electrical related industries there are a number of shrinking ratios available, our main ones including 2:1 & 3:1 which refer to the size which they end up shrinking to, enabling you to pick and choose depending on your required use.
We keep Heatshrink Sleeving & Tubing in a wide range of sizes and styles which can be found through their product pages below. Each size is available for free sample lengths where required so that you can try before you buy, enabling you to make an educated decision.
Different Heatshrink Sleeves / Tubes That We Offer Include:
We keep Heatshrink Sleeving & Tubing in a wide range of sizes and styles which can be found through their product pages below. Each size is available for free sample lengths where required so that you can try before you buy, enabling you to make an educated decision.
Different Heatshrink Sleeves / Tubes That We Offer Include:
- Adhesive Lined
- Heat Shrink Tubing 2:1 - Available in Up to 25.4mm Diameter & Above
- Heat Shrink Tubing 3:1
- Manufactured from premium quality Polyolefin thermoplastic
- Available in a number of shrinking ratios
- Versatile and multi purpose product
- Free samples available
Variations Of Heatshrink Sleeves & Tubing
This Polyolefin Heat Shrink tubing is manufactured using the ratio of 2:1, this allows it to shrink down in a 2:1 ratio. Heatshrink sleeving is excellent for the protection of frayed or damaged wires and can be used with a number of applications where deemed fit for insulation purposes. Coming in sizes less than 25.4mm these are some of the most commonly used variants as they fit most industry standard sized cabling and wire systems.
This shrink to fit Polyolefin sleeving comes in an ideal ratio of 2:1, this allows its use with a wide variety of applications including wires and small tubes which they are commonly used for. We keep this Heatshrink sleeving in a range of sizes and colours to suit all specific applications. Most commonly used inside the Electronics industry they are regularly used to fix and repair worn wires, pro-longing their life span dramatically in industrial locations where they may often be exposed to harmful acids, alkalis or other general factors.
Polyolefin heat shrink tubing or Polyolefin Heat shrink sleeving with a shrink ratio of 3:1 is ideal for use with smaller applications as it shrinks down to fit excellently. Simply requiring a slight amount of heat for it to shrink down to size, this is an extremely easy to use material and can be mastered in almost no time at all. Also available in a huge range of sizes and colours to suit, you can rest assured that we have the ideal choice for your specific application. 3:1 shrinking ratio is recommended for larger products with more of a shrink area to cover, ensuring a full and effective coverage using our Heatshrink sleeving.
Adhesive lined shrink to fit Polyolefin plastic is a widely sought after and used part inside a number of industries, one of the most common being the Electronics industry where the Sleeves are used to connect and repair a set of wires, being an excellent conductor of Electricity. This adhesive lined version is perfect for hard to reach or in accessible area's where standard sleeving or tubing would be almost impossible to install, this is where adhesive lined takes center stage.
Please click through to find all available product sizes.
For all relevant product information, or to view our available guides, please see the full category description above.
Welcome to Vital Parts
One of the largest and most trusted Plastic & Rubber Component Manufacturers in the UK.
Being one of the most trusted components manufacturers and distributors in the UK, we pride ourselves on providing our customers with the best services and products. Ensuring that we stay competetive by providing you with the best deal, along with free samples and secondary finishing services to give you the best outcome possible. As well as offering an excellent range of components we are able to manufacture to your specific requirements with a range of dip moulding, injection moulding, extrusions, rotational moulding and overmoulding techniques.
Why you should choose us for your Plastic, Rubber & Metal Component needs
Fast packaging and shipping at all times
Bulk discounts available on all products
Free sampling available on most products
Excellent, friendly customer support on 01233 713581
