12mm x 150mm Coach Screw (DIN 571) | 4.8 Steel Galvanised
| Quantity |
Unit Price
(ex. VAT)
|
Unit Price
(inc. VAT)
|
|---|---|---|
| 1 - 99 | £0.78 | £0.93 |
| 100 - 499 | £0.73 | £0.88 |
| 500 - 999 | £0.69 | £0.83 |
| 1000 - 4999 | £0.58 | £0.70 |
| 5000 + | £0.36 | £0.43 |
£0.93 / each
.png)
Product Specification
| Size | 12mm |
| Length | 150mm |
| Head Height | 8.0mm |
| Thread Length | 90mm |
| Material | 4.8 Steel Galvanised |
| Across Flats | 19mm |
| Shank Diameter | 12mm |
| Standard | DIN 571 |
Frequently Bought Together
Total Price: £0.00
M12 x 150mm Coach Screw DIN 571 | 4.8 Steel Galvanised
This M12 coach screw is sized at 12mm x 150mm and manufactured to DIN 571, giving installers a clear specification for structural timber assemblies, brackets and support plates. This makes the fixing a strong match for installers searching for a dependable M12 coach screw.
The galvanised 4.8 steel finish offers a stronger protective layer than standard bright zinc plating, making it a practical choice for fencing, landscaping and external timber frames. It is a strong choice where neat access for socket driving is available and a slotted or cross recess drive would be too limiting. The larger 12mm shank makes it suitable for heavier timber sections, support posts and bracket assemblies.
Common Applications
- Decking subframes and outdoor timber supports
- Gate hinges, straps and latch plates
- Outdoor sleepers, gates and site timber assemblies
- Maintenance of wooden platforms and service walkways
M12 x 150mm Coach Screw Dimensions
- Size: 12mm
- Length: 150mm
- Head Height: 8.0mm
- Thread Length: 90mm
- Across Flats: 19mm
- Shank Diameter: 12mm
- Standard: DIN 571
- Material: 4.8 Steel Galvanised
Coach Screw Buying Guide
Pilot holes are especially important in hardwoods, dense treated timber and fixings close to an edge. This helps improve alignment and reduce splitting. Click here to read our coach screws guide.
Explore the full DIN 571 Coach Screws range and use our coach screw guide when comparing sizes, pilot holes and applications.
Fri 8.30 am - 3.30 pm
