4.2mm x 19mm Phillips Countersunk Self Drilling Screw (PH2) DIN 7504OH | A2 Stainless Steel
| Quantity |
Unit Price
(ex. VAT)
|
Unit Price
(inc. VAT)
|
|---|---|---|
| 1000 - 1999 | £0.06 | £0.07 |
| 2000 - 4999 | £0.04 | £0.05 |
| 5000 + | £0.03 | £0.04 |
£0.07 / each
.png)
Product Specification
| Thread Size | 4.2mm |
| Length | 19mm |
| Drive | PH2 |
| Head Diameter | 8.4mm |
| Head Height | 2.60mm |
| Material | A2 Stainless Steel |
| Standard | DIN 7504OH |
Frequently Bought Together
Total Price: £0.00
4.2mm x 19mm Phillips Countersunk Self Drilling Screw | DIN 7504OH | A2 Stainless Steel
For sheet-metal panels, covers and fabricated assemblies, this 4.2mm x 19mm Phillips self drilling screw can create its own entry hole in compatible metal before the thread engages the receiving material. The countersunk profile is useful where clearance, appearance or the positioning of adjacent parts requires a flush fixing. The A2 Stainless Steel construction provides good corrosion resistance for general engineering, sheet-metal fabrication and suitable exposed applications.
What Are Countersunk Self Drilling Screws?
Self Drilling Countersunk Screws are metal fasteners that can drill and fasten during the same installation process in suitable materials. Their tapered head is designed to sit level with or below the surrounding surface which helps maintain clearance around covers, panels and adjoining components.
Common Applications
- HVAC and Ventilation: Secures suitable ducting accessories, covers and fabricated metal fittings where a countersunk finish is required.
- Control Cabinets: Provides a flush fixing for mounting plates, panels and compatible metal components in control equipment.
- Signage and Displays: Keeps the fixing head close to the surface on suitable metal signs, frames and display assemblies.
- Workshop Fabrication: Supports general repairs, prototype work and metal assembly using compatible sheet or light-gauge sections.
4.2mm x 19mm DIN 7504OH Countersunk Self Drilling Screw Dimensions
- Thread Size: 4.2mm
- Length: 19mm
- Head Height: 2.60mm
- Head Diameter: 8.4mm
- Drive: PH2
- Standard: DIN 7504OH
- Material: A2 Stainless Steel
Key Benefits
- DIN 7504OH identifies the recorded standard or drive format for this product.
- Integrated drill point can reduce the need for a separate pilot hole in suitable metal.
- Low-profile installed finish suits panels, covers and assemblies where clearance is important.
- 2.60mm head height gives the specified countersunk head profile.
Compare more sizes in our Countersunk Self Drilling Screws range. If a countersunk head is not the right fit, see our wider stainless steel self-tapping screws range for other self-drilling screw styles. If you are unsure which drive or standard suits your application, contact our team on 01233 713581.
Fri 8.30 am - 3.30 pm
