4.8mm x 13mm Torx Countersunk Self Drilling Screw (T25) DIN 7504OT | A2 Stainless Steel
| Quantity |
Unit Price
(ex. VAT)
|
Unit Price
(inc. VAT)
|
|---|---|---|
| 1000 - 1999 | £0.09 | £0.11 |
| 2000 - 4999 | £0.07 | £0.08 |
| 5000 + | £0.05 | £0.06 |
£0.11 / each
.png)
Product Specification
| Thread Size | 4.8mm |
| Length | 13mm |
| Drive | T25 |
| Head Diameter | 9.3mm |
| Head Height | 2.80mm |
| Material | A2 Stainless Steel |
| Standard | DIN 7504OT |
Frequently Bought Together
Total Price: £0.00
4.8mm x 13mm Torx Countersunk Self Drilling Screw | DIN 7504OT | A2 Stainless Steel
This 4.8mm x 13mm Torx countersunk self tapping screw is suited to light-gauge steel components and overlapping sheet-metal joints where a raised screw head could interfere with another panel, cover or moving component. The self-drilling point can reduce separate pilot-drilling operations in suitable metal while the countersunk head finishes level with the prepared surface. The A2 Stainless Steel construction provides good corrosion resistance for general engineering, sheet-metal fabrication and suitable exposed applications.
What Are Countersunk Self Drilling Screws?
Self Drilling Countersunk Screws are metal fasteners that can drill and fasten during the same installation process in suitable materials. Their tapered head is designed to sit level with or below the surrounding surface which helps maintain clearance around covers, panels and adjoining components.
Common Applications
- Sheet Metal Fabrication: Joins panels, overlapping sheets, covers and fabricated components where a flush fixing is preferred.
- Electrical Enclosures: Secures access panels, mounting plates and enclosure components without leaving a prominent raised head.
- Machinery and Equipment: Fastens suitable guards, housings and casings where head clearance needs to be maintained.
- Automotive and Transport: Provides a low-profile fixing for compatible brackets, trim panels and lightweight fabricated components.
4.8mm x 13mm DIN 7504OT Countersunk Self Drilling Screw Dimensions
- Thread Size: 4.8mm
- Length: 13mm
- Head Height: 2.80mm
- Head Diameter: 9.3mm
- Drive: T25
- Standard: DIN 7504OT
- Material: A2 Stainless Steel
Key Benefits
- Countersunk head can sit flush in a correctly prepared recess to reduce protrusion.
- 4.8mm thread diameter with 13mm length provides the main screw size.
- T25 drive matches the specified driver or bit for installation.
- A2 Stainless Steel construction provides the specified material and finish.
See our wider Countersunk Self Drilling Screws category for alternative drive types and sizes. Our broader self tapping Torx screws range includes additional head types, drive options and material finishes for compatible metal applications. For product-selection support, speak with our team on 01233 713581.
Fri 8.30 am - 3.30 pm
