4.8mm x 100mm Torx Countersunk Self Drilling Screw (T25) DIN 7504OT | A2 Stainless Steel
| Quantity |
Unit Price
(ex. VAT)
|
Unit Price
(inc. VAT)
|
|---|---|---|
| 500 - 1999 | £0.39 | £0.47 |
| 2000 - 4999 | £0.28 | £0.34 |
| 5000 + | £0.22 | £0.26 |
£0.47 / each
.png)
Product Specification
| Thread Size | 4.8mm |
| Length | 100mm |
| Drive | T25 |
| Head Diameter | 9.3mm |
| Head Height | 2.80mm |
| Material | A2 Stainless Steel |
| Standard | DIN 7504OT |
Frequently Bought Together
Total Price: £0.00
4.8mm x 100mm Torx Countersunk Self Drilling Screw | DIN 7504OT | A2 Stainless Steel
Providing drilling, thread forming and fastening in one operation, this 4.8mm x 100mm self-drilling screw for metal is designed for compatible metal assemblies. The T25 recess gives controlled tool engagement and the countersunk head creates a neat low-profile finish when seated correctly. The A2 Stainless Steel construction provides good corrosion resistance for general engineering, sheet-metal fabrication and suitable exposed applications.
What Are Countersunk Self Drilling Screws?
Countersunk Tek Screws are commonly used for metal-to-metal fastening where both self drilling performance and a flush installed head are required. Correct driver size, material thickness and countersink depth are important for secure installation.
Common Applications
- Sheet Metal Fabrication: Joins panels, overlapping sheets, covers and fabricated components where a flush fixing is preferred.
- Electrical Enclosures: Secures access panels, mounting plates and enclosure components without leaving a prominent raised head.
- Machinery and Equipment: Fastens suitable guards, housings and casings where head clearance needs to be maintained.
- Automotive and Transport: Provides a low-profile fixing for compatible brackets, trim panels and lightweight fabricated components.
4.8mm x 100mm DIN 7504OT Countersunk Self Drilling Screw Dimensions
- Thread Size: 4.8mm
- Length: 100mm
- Head Height: 2.80mm
- Head Diameter: 9.3mm
- Drive: T25
- Standard: DIN 7504OT
- Material: A2 Stainless Steel
Key Benefits
- 2.80mm head height gives the specified countersunk head profile.
- T25 drive matches the specified driver or bit for installation.
- Integrated drill point can reduce the need for a separate pilot hole in suitable metal.
- Countersunk head can sit flush in a correctly prepared recess to reduce protrusion.
See our wider Countersunk Self Drilling Screws category for alternative drive types and sizes. You can also compare other metal fasteners in our complete self tapping Torx screws range, including pan head and alternative self-drilling designs. For product-selection support, speak with our team on 01233 713581.
Fri 8.30 am - 3.30 pm
