3.9mm x 13mm Pozi Countersunk Self Drilling Screw (PZ2) DIN 7504OZ | A2 Stainless Steel
| Quantity |
Unit Price
(ex. VAT)
|
Unit Price
(inc. VAT)
|
|---|---|---|
| 1000 - 1999 | £0.04 | £0.05 |
| 2000 - 4999 | £0.03 | £0.04 |
| 5000 + | £0.03 | £0.03 |
£0.05 / each
.png)
Product Specification
| Thread Size | 3.9mm |
| Length | 13mm |
| Drive | PZ2 |
| Head Diameter | 7.5mm |
| Head Height | 2.50mm |
| Material | A2 Stainless Steel |
| Standard | DIN 7504OZ |
Frequently Bought Together
Total Price: £0.00
3.9mm x 13mm Pozidriv Countersunk Self Drilling Screw | DIN 7504OZ | A2 Stainless Steel
This 3.9mm x 13mm Pozidriv self drilling countersunk screw is designed to drill, form a mating thread and fasten into compatible metal in one installation process. The countersunk head is intended to sit within a matching recess so the finished fixing can remain flush with the surrounding surface. The A2 Stainless Steel construction provides good corrosion resistance for general engineering, sheet-metal fabrication and suitable exposed applications.
What Are Countersunk Self Drilling Screws?
Countersunk Self Tapping Screws with an integrated drill point can reduce separate drilling and tapping stages in compatible sheet metal. Once the point has penetrated the material, the thread engages the metal and the countersunk head seats into a matching recess.
Common Applications
- HVAC and Ventilation: Secures suitable ducting accessories, covers and fabricated metal fittings where a countersunk finish is required.
- Control Cabinets: Provides a flush fixing for mounting plates, panels and compatible metal components in control equipment.
- Signage and Displays: Keeps the fixing head close to the surface on suitable metal signs, frames and display assemblies.
- Workshop Fabrication: Supports general repairs, prototype work and metal assembly using compatible sheet or light-gauge sections.
3.9mm x 13mm DIN 7504OZ Countersunk Self Drilling Screw Dimensions
- Thread Size: 3.9mm
- Length: 13mm
- Head Height: 2.50mm
- Head Diameter: 7.5mm
- Drive: PZ2
- Standard: DIN 7504OZ
- Material: A2 Stainless Steel
Key Benefits
- DIN 7504OZ identifies the recorded standard or drive format for this product.
- Integrated drill point can reduce the need for a separate pilot hole in suitable metal.
- Low-profile installed finish suits panels, covers and assemblies where clearance is important.
- 2.50mm head height gives the specified countersunk head profile.
See our wider Countersunk Self Drilling Screws category for alternative drive types and sizes. Our broader self-drilling screws for metal range includes additional head types, drive options and material finishes for compatible metal applications. For product-selection support, speak with our team on 01233 713581.
Fri 8.30 am - 3.30 pm
