4.2mm x 60mm Pozi Countersunk Self Drilling Screw (PZ2) DIN 7504OZ | A2 Stainless Steel
| Quantity |
Unit Price
(ex. VAT)
|
Unit Price
(inc. VAT)
|
|---|---|---|
| 1000 - 1999 | £0.13 | £0.16 |
| 2000 - 4999 | £0.09 | £0.11 |
| 5000 + | £0.07 | £0.09 |
£0.16 / each
.png)
Product Specification
| Thread Size | 4.2mm |
| Length | 60mm |
| Drive | PZ2 |
| Head Diameter | 8.4mm |
| Head Height | 2.60mm |
| Material | A2 Stainless Steel |
| Standard | DIN 7504OZ |
Frequently Bought Together
Total Price: £0.00
4.2mm x 60mm Pozidriv Countersunk Self Drilling Screw | DIN 7504OZ | A2 Stainless Steel
This 4.2mm x 60mm Pozidriv metal self tapping screw is suited to control cabinets, equipment housings and mounting brackets where a raised screw head could interfere with another panel, cover or moving component. The self-drilling point can reduce separate pilot-drilling operations in suitable metal while the countersunk head finishes level with the prepared surface. The A2 Stainless Steel construction provides good corrosion resistance for general engineering, sheet-metal fabrication and suitable exposed applications.
What Are Countersunk Self Drilling Screws?
Countersunk Tek Screws are commonly used for metal-to-metal fastening where both self drilling performance and a flush installed head are required. Correct driver size, material thickness and countersink depth are important for secure installation.
Common Applications
- Sheet Metal Fabrication: Joins panels, overlapping sheets, covers and fabricated components where a flush fixing is preferred.
- Electrical Enclosures: Secures access panels, mounting plates and enclosure components without leaving a prominent raised head.
- Machinery and Equipment: Fastens suitable guards, housings and casings where head clearance needs to be maintained.
- Automotive and Transport: Provides a low-profile fixing for compatible brackets, trim panels and lightweight fabricated components.
4.2mm x 60mm DIN 7504OZ Countersunk Self Drilling Screw Dimensions
- Thread Size: 4.2mm
- Length: 60mm
- Head Height: 2.60mm
- Head Diameter: 8.4mm
- Drive: PZ2
- Standard: DIN 7504OZ
- Material: A2 Stainless Steel
Key Benefits
- 2.60mm head height gives the specified countersunk head profile.
- PZ2 drive matches the specified driver or bit for installation.
- Integrated drill point can reduce the need for a separate pilot hole in suitable metal.
- Countersunk head can sit flush in a correctly prepared recess to reduce protrusion.
View the full Countersunk Self Drilling Screws range to compare diameters, lengths, drives and materials. If a countersunk head is not the right fit, see our wider stainless steel self-tapping screws range for other self-drilling screw styles. If you need help choosing the correct screw for your material thickness, call us on 01233 713581.
Fri 8.30 am - 3.30 pm
