5.5mm x 100mm Pozi Countersunk Self Drilling Screw (PZ3) DIN 7504OZ | A2 Stainless Steel
| Quantity |
Unit Price
(ex. VAT)
|
Unit Price
(inc. VAT)
|
|---|---|---|
| 200 - 1999 | £0.63 | £0.76 |
| 2000 - 4999 | £0.45 | £0.54 |
| 5000 + | £0.35 | £0.42 |
£0.76 / each
.png)
Product Specification
| Thread Size | 5.5mm |
| Length | 100mm |
| Drive | PZ3 |
| Head Diameter | 10.3mm |
| Head Height | 3.00mm |
| Material | A2 Stainless Steel |
| Standard | DIN 7504OZ |
Frequently Bought Together
Total Price: £0.00
5.5mm x 100mm Pozidriv Countersunk Self Drilling Screw | DIN 7504OZ | A2 Stainless Steel
This 5.5mm x 100mm Pozidriv countersunk self tapping screw is suited to general construction metalwork where a flush fixing is required where a raised screw head could interfere with another panel, cover or moving component. The self-drilling point can reduce separate pilot-drilling operations in suitable metal while the countersunk head finishes level with the prepared surface. The A2 Stainless Steel construction provides good corrosion resistance for general engineering, sheet-metal fabrication and suitable exposed applications.
What Are Countersunk Self Drilling Screws?
Countersunk Tek Screws are commonly used for metal-to-metal fastening where both self drilling performance and a flush installed head are required. Correct driver size, material thickness and countersink depth are important for secure installation.
Common Applications
- Sheet Metal Fabrication: Joins panels, overlapping sheets, covers and fabricated components where a flush fixing is preferred.
- Electrical Enclosures: Secures access panels, mounting plates and enclosure components without leaving a prominent raised head.
- Machinery and Equipment: Fastens suitable guards, housings and casings where head clearance needs to be maintained.
- Automotive and Transport: Provides a low-profile fixing for compatible brackets, trim panels and lightweight fabricated components.
5.5mm x 100mm DIN 7504OZ Countersunk Self Drilling Screw Dimensions
- Thread Size: 5.5mm
- Length: 100mm
- Head Height: 3.00mm
- Head Diameter: 10.3mm
- Drive: PZ3
- Standard: DIN 7504OZ
- Material: A2 Stainless Steel
Key Benefits
- Countersunk head can sit flush in a correctly prepared recess to reduce protrusion.
- 5.5mm thread diameter with 100mm length provides the main screw size.
- PZ3 drive matches the specified driver or bit for installation.
- A2 Stainless Steel construction provides the specified material and finish.
See our wider Countersunk Self Drilling Screws category for alternative drive types and sizes. For more fastening options, browse our wider stainless steel self drilling screws range to compare different head styles and drive types. For product-selection support, speak with our team on 01233 713581.
Fri 8.30 am - 3.30 pm