2.9mm x 19mm Torx Countersunk Self Drilling Screw (T10) DIN 7504P | BZP Steel
| Quantity |
Unit Price
(ex. VAT)
|
Unit Price
(inc. VAT)
|
|---|---|---|
| 1000 - 1999 | £0.03 | £0.04 |
| 2000 - 4999 | £0.03 | £0.03 |
| 5000 + | £0.02 | £0.02 |
£0.04 / each
Product Specification
| Thread Size | 2.9mm |
| Length | 19mm |
| Drive | T10 |
| Head Diameter | 5.5mm |
| Head Height | 1.70mm |
| Material | Steel BZP |
| Standard | DIN 7504P |
Frequently Bought Together
Total Price: £0.00
2.9mm x 19mm Torx Countersunk Self Drilling Screw | DIN 7504P | Steel BZP
Designed for control cabinets, equipment housings and mounting brackets, this 2.9mm x 19mm metal self tapping screw combines an integrated drill point with a self-tapping thread and countersunk head. The T10 drive provides the specified tool engagement while the tapered head helps reduce protrusion once installed into a suitable countersunk recess. The BZP Steel construction provides a zinc-plated finish for general indoor and suitably protected metal fastening applications.
What Are Countersunk Self Drilling Screws?
Self Drilling Countersunk Screws are metal fasteners that can drill and fasten during the same installation process in suitable materials. Their tapered head is designed to sit level with or below the surrounding surface which helps maintain clearance around covers, panels and adjoining components.
Common Applications
- HVAC and Ventilation: Secures suitable ducting accessories, covers and fabricated metal fittings where a countersunk finish is required.
- Control Cabinets: Provides a flush fixing for mounting plates, panels and compatible metal components in control equipment.
- Signage and Displays: Keeps the fixing head close to the surface on suitable metal signs, frames and display assemblies.
- Workshop Fabrication: Supports general repairs, prototype work and metal assembly using compatible sheet or light-gauge sections.
2.9mm x 19mm DIN 7504P Countersunk Self Drilling Screw Dimensions
- Thread Size: 2.9mm
- Length: 19mm
- Head Height: 1.70mm
- Head Diameter: 5.5mm
- Drive: T10
- Standard: DIN 7504P
- Material: Steel BZP
Key Benefits
- DIN 7504P identifies the recorded standard or drive format for this product.
- Integrated drill point can reduce the need for a separate pilot hole in suitable metal.
- Low-profile installed finish suits panels, covers and assemblies where clearance is important.
- 1.70mm head height gives the specified countersunk head profile.
View the full Countersunk Self Drilling Screws range to compare diameters, lengths, drives and materials. If a countersunk head is not the right fit, see our wider metal self drilling screws range for other self-drilling screw styles. If you need help choosing the correct screw for your material thickness, call us on 01233 713581.
Fri 8.30 am - 3.30 pm
