4.8mm x 45mm Phillips Countersunk Self Drilling Screw (PH3) DIN 7504P | BZP Steel
| Quantity |
Unit Price
(ex. VAT)
|
Unit Price
(inc. VAT)
|
|---|---|---|
| 500 - 1999 | £0.07 | £0.09 |
| 2000 - 4999 | £0.06 | £0.07 |
| 5000 + | £0.04 | £0.05 |
£0.09 / each
Product Specification
| Thread Size | 4.8mm |
| Length | 45mm |
| Drive | PH3 |
| Head Diameter | 9.5mm |
| Head Height | 3.00mm |
| Material | Steel BZP |
| Standard | DIN 7504P |
Frequently Bought Together
Total Price: £0.00
4.8mm x 45mm Phillips Countersunk Self Drilling Screw | DIN 7504P | Steel BZP
This 4.8mm x 45mm Phillips countersunk Tek screw is suited to sheet-metal panels, covers and fabricated assemblies where a raised screw head could interfere with another panel, cover or moving component. The self-drilling point can reduce separate pilot-drilling operations in suitable metal while the countersunk head finishes level with the prepared surface. The BZP Steel construction provides a zinc-plated finish for general indoor and suitably protected metal fastening applications.
What Are Countersunk Self Drilling Screws?
Countersunk Self Tapping Screws with an integrated drill point can reduce separate drilling and tapping stages in compatible sheet metal. Once the point has penetrated the material, the thread engages the metal and the countersunk head seats into a matching recess.
Common Applications
- HVAC and Ventilation: Secures suitable ducting accessories, covers and fabricated metal fittings where a countersunk finish is required.
- Control Cabinets: Provides a flush fixing for mounting plates, panels and compatible metal components in control equipment.
- Signage and Displays: Keeps the fixing head close to the surface on suitable metal signs, frames and display assemblies.
- Workshop Fabrication: Supports general repairs, prototype work and metal assembly using compatible sheet or light-gauge sections.
4.8mm x 45mm DIN 7504P Countersunk Self Drilling Screw Dimensions
- Thread Size: 4.8mm
- Length: 45mm
- Head Height: 3.00mm
- Head Diameter: 9.5mm
- Drive: PH3
- Standard: DIN 7504P
- Material: Steel BZP
Key Benefits
- DIN 7504P identifies the recorded standard or drive format for this product.
- Integrated drill point can reduce the need for a separate pilot hole in suitable metal.
- Low-profile installed finish suits panels, covers and assemblies where clearance is important.
- 3.00mm head height gives the specified countersunk head profile.
See our wider Countersunk Self Drilling Screws category for alternative drive types and sizes. You can also compare other metal fasteners in our complete self drilling screws range, including pan head and alternative self-drilling designs. For product-selection support, speak with our team on 01233 713581.
Fri 8.30 am - 3.30 pm
