6.3mm x 22mm Phillips Countersunk Self Drilling Screw (PH3) DIN 7504P | BZP Steel
| Quantity |
Unit Price
(ex. VAT)
|
Unit Price
(inc. VAT)
|
|---|---|---|
| 500 - 1999 | £0.08 | £0.10 |
| 2000 - 4999 | £0.06 | £0.07 |
| 5000 + | £0.04 | £0.05 |
£0.10 / each
Product Specification
| Thread Size | 6.3mm |
| Length | 22mm |
| Drive | PH3 |
| Head Diameter | 12.4mm |
| Head Height | 3.80mm |
| Material | Steel BZP |
| Standard | DIN 7504P |
Frequently Bought Together
Total Price: £0.00
6.3mm x 22mm Phillips Countersunk Self Drilling Screw | DIN 7504P | Steel BZP
This 6.3mm x 22mm Phillips self tapping screw for metal is suited to sheet-metal panels, covers and fabricated assemblies where a raised screw head could interfere with another panel, cover or moving component. The self-drilling point can reduce separate pilot-drilling operations in suitable metal while the countersunk head finishes level with the prepared surface. The BZP Steel construction provides a zinc-plated finish for general indoor and suitably protected metal fastening applications.
What Are Countersunk Self Drilling Screws?
Self Drilling Countersunk Screws are metal fasteners that can drill and fasten during the same installation process in suitable materials. Their tapered head is designed to sit level with or below the surrounding surface which helps maintain clearance around covers, panels and adjoining components.
Common Applications
- Sheet Metal Fabrication: Joins panels, overlapping sheets, covers and fabricated components where a flush fixing is preferred.
- Electrical Enclosures: Secures access panels, mounting plates and enclosure components without leaving a prominent raised head.
- Machinery and Equipment: Fastens suitable guards, housings and casings where head clearance needs to be maintained.
- Automotive and Transport: Provides a low-profile fixing for compatible brackets, trim panels and lightweight fabricated components.
6.3mm x 22mm DIN 7504P Countersunk Self Drilling Screw Dimensions
- Thread Size: 6.3mm
- Length: 22mm
- Head Height: 3.80mm
- Head Diameter: 12.4mm
- Drive: PH3
- Standard: DIN 7504P
- Material: Steel BZP
Key Benefits
- 6.3mm thread diameter with 22mm length provides the main screw size.
- 12.4mm head diameter provides the stated countersunk bearing width.
- Steel BZP construction provides the specified material and finish.
- Self-tapping thread forms a mating thread as the screw is driven into compatible material.
See our wider Countersunk Self Drilling Screws category for alternative drive types and sizes. You can also compare other metal fasteners in our complete other self drilling screws range, including pan head and alternative self-drilling designs. For product-selection support, speak with our team on 01233 713581.
Fri 8.30 am - 3.30 pm
