12.1 x 5 mm Natural Nylon Flanged Bushing
| Quantity |
Unit Price
(ex. VAT)
|
Unit Price
(inc. VAT)
|
|---|---|---|
| 1 - 24 | £0.51 | £0.61 |
| 25 - 49 | £0.46 | £0.55 |
| 50 - 99 | £0.40 | £0.48 |
| 100 - 249 | £0.35 | £0.42 |
| 250 - 499 | £0.31 | £0.37 |
| 500 - 999 | £0.28 | £0.33 |
| 1000 + | £0.24 | £0.29 |
£0.61 / each
.png)
Product Specification
| Internal Diameter | 12.1mm |
| Outside Diameter | 14.8mm |
| Flange Diameter | 25.6mm |
| Shaft Length | 2.0mm |
| Colour | Natural |
| Flange Thickness | 2.0mm |
| Material | Polyamide |
Frequently Bought Together
Total Price: £0.00
12.1mm ID x 14.8mm OD Nylon Flanged Bushing | 2mm Shaft | Natural
Used within control panels and electrical enclosures, this Natural Nylon Bush provides a flanged insulating sleeve with a 2.0mm shaft length and 25.6mm flange diameter. The heat-stabilised Nylon 6/6 material is suited to electrical and mechanical assemblies where lightweight isolation and positioning are important.
What Are Nylon Flanged Bushes?
A Nylon Shoulder Bushing uses a cylindrical sleeve to pass through a hole with a flange that remains on the surface. This geometry allows the bush to insulate a compatible fastener, provide a controlled spacing point and help absorb light vibration or movement within the assembly.
Common Applications
- PCB Spacing: Helps maintain separation between circuit boards, panels and supporting components where a flanged spacer is suitable.
- Vibration Damping: Helps reduce direct contact and absorb light vibration or movement between assembled components.
- Component Spacing: Maintains a defined gap between compatible parts where the flanged shoulder provides a controlled bearing surface.
- Light Mechanical Assemblies: Acts as a low-mass sleeve or shoulder spacer around compatible shafts, pins and fasteners.
12.1mm ID Nylon Flanged Bushing Dimensions
- Internal Diameter: 12.1mm
- Outside Diameter: 14.8mm
- Flange Diameter: 25.6mm
- Shaft Length: 2.0mm
- Flange Thickness: 2.0mm
- Colour: Natural
- Material: Polyamide
Key Benefits
- Nylon construction can help damp light vibration, movement and shock between assembled components.
- Suitable as a screw insulator, shoulder washer or flanged spacer in correctly sized assemblies.
- 25.6mm flange diameter creates a wider bearing surface against the panel or component.
- Heat-stabilised Nylon 6/6 provides a lightweight, non-conductive material for electrical and engineering applications.
Browse the full Nylon Bushes, Screw Insulators and Shoulder Washers range for additional sizes in Black and Natural finishes. Technical sizing support is available on 01233 713581.
Fri 8.30 am - 3.30 pm
