Flanged Nylon Bushes - NYB075
| Quantity |
Unit Price
(ex. VAT)
|
Unit Price
(inc. VAT)
|
|---|---|---|
| 1 - 1 | £0.23 | £0.27 |
| 2 - 999 | £0.23 | £0.27 |
| 1000 - 4999 | £0.19 | £0.23 |
| 5000 + | £0.15 | £0.18 |
£0.27 / each
.png)
Product Specification
| Internal Diameter | 6.6mm |
| Outside Diameter | 7.9mm |
| Flange Diameter | 13.0mm |
| Shaft Length | 4.7mm |
| Colour | Natural |
| Flange Thickness | N/A |
| Material | Polyamide |
Frequently Bought Together
Total Price: £0.00
6.6mm ID x 7.9mm OD Nylon Flanged Bushing | 4.7mm Shaft | Natural
Designed for sensor housings and electronic modules, this Nylon Flanged Bushing has a 6.6mm internal diameter, 7.9mm outside diameter and 4.7mm shaft length. The Natural heat-stabilised Nylon 6/6 construction provides a non-conductive sleeve and flanged bearing surface for insulating fasteners, spacing components and reducing direct metal-to-metal contact.
What Are Nylon Flanged Bushes?
Nylon Flanged Bushings provide a lightweight alternative to metal bushes where electrical isolation and low-friction separation are important. They are commonly used around screws and fasteners, through panels and within PCB or electronic assemblies where the sleeve and flange help locate and insulate the connection.
Common Applications
- Automotive Electrical Systems: Provides non-conductive separation around suitable fasteners used in vehicle electrical and electronic assemblies.
- Equipment Housings: Provides an insulating bush through suitable holes in machinery covers, enclosures and equipment panels.
- Control Panels: Insulates compatible fasteners and mounting points in electrical control equipment and enclosure assemblies.
- Panel Protection: Provides a sleeve around a mounting hole which can help protect the hole edge from the passing screw or shaft.
6.6mm ID Nylon Flanged Bushing Dimensions
- Internal Diameter: 6.6mm
- Outside Diameter: 7.9mm
- Flange Diameter: 13.0mm
- Shaft Length: 4.7mm
- Colour: Natural
- Material: Polyamide
Key Benefits
- Natural finish provides a neutral appearance that suits internal electrical and engineering assemblies.
- 6.6mm internal diameter provides the bore size for the compatible screw, pin or passing component.
- 4.7mm shaft length defines the depth of the insulating sleeve through the assembly.
- Flanged shoulder design supports both insulation and component spacing within one moulded part.
See alternative flanged bush sizes in the Nylon Bushes category. If you need help selecting an insulating bush for a screw, panel or PCB assembly, call Vital Parts on 01233 713581.
Fri 8.30 am - 3.30 pm