5.5mm x 60mm Torx Countersunk Self Drilling Screw (T25) DIN 7504OT | A2 Stainless Steel
| Quantity |
Unit Price
(ex. VAT)
|
Unit Price
(inc. VAT)
|
|---|---|---|
| 200 - 1999 | £0.36 | £0.43 |
| 2000 - 4999 | £0.26 | £0.31 |
| 5000 + | £0.20 | £0.24 |
£0.43 / each
.png)
Product Specification
| Thread Size | 5.5mm |
| Length | 60mm |
| Drive | T25 |
| Head Diameter | 10.3mm |
| Head Height | 3.00mm |
| Material | A2 Stainless Steel |
| Standard | DIN 7504OT |
Frequently Bought Together
Total Price: £0.00
5.5mm x 60mm Torx Countersunk Self Drilling Screw | DIN 7504OT | A2 Stainless Steel
This 5.5mm x 60mm Torx self-drilling screw for metal is suited to general construction metalwork where a flush fixing is required where a raised screw head could interfere with another panel, cover or moving component. The self-drilling point can reduce separate pilot-drilling operations in suitable metal while the countersunk head finishes level with the prepared surface. The A2 Stainless Steel construction provides good corrosion resistance for general engineering, sheet-metal fabrication and suitable exposed applications.
What Are Countersunk Self Drilling Screws?
Countersunk Self Tapping Screws with an integrated drill point can reduce separate drilling and tapping stages in compatible sheet metal. Once the point has penetrated the material, the thread engages the metal and the countersunk head seats into a matching recess.
Common Applications
- HVAC and Ventilation: Secures suitable ducting accessories, covers and fabricated metal fittings where a countersunk finish is required.
- Control Cabinets: Provides a flush fixing for mounting plates, panels and compatible metal components in control equipment.
- Signage and Displays: Keeps the fixing head close to the surface on suitable metal signs, frames and display assemblies.
- Workshop Fabrication: Supports general repairs, prototype work and metal assembly using compatible sheet or light-gauge sections.
5.5mm x 60mm DIN 7504OT Countersunk Self Drilling Screw Dimensions
- Thread Size: 5.5mm
- Length: 60mm
- Head Height: 3.00mm
- Head Diameter: 10.3mm
- Drive: T25
- Standard: DIN 7504OT
- Material: A2 Stainless Steel
Key Benefits
- Countersunk head can sit flush in a correctly prepared recess to reduce protrusion.
- 5.5mm thread diameter with 60mm length provides the main screw size.
- T25 drive matches the specified driver or bit for installation.
- A2 Stainless Steel construction provides the specified material and finish.
See our wider Countersunk Self Drilling Screws category for alternative drive types and sizes. For more fastening options, browse our wider self drilling screws range to compare different head styles and drive types. For product-selection support, speak with our team on 01233 713581.
Fri 8.30 am - 3.30 pm
