6.3mm x 16mm Pozi Countersunk Self Drilling Screw (PZ3) DIN 7504OZ | A2 Stainless Steel
| Quantity |
Unit Price
(ex. VAT)
|
Unit Price
(inc. VAT)
|
|---|---|---|
| 500 - 1999 | £0.15 | £0.18 |
| 2000 - 4999 | £0.11 | £0.13 |
| 5000 + | £0.08 | £0.10 |
£0.18 / each
Product Specification
| Thread Size | 6.3mm |
| Length | 16mm |
| Drive | PZ3 |
| Head Diameter | 11.3mm |
| Head Height | 3.15mm |
| Material | A2 Stainless Steel |
| Standard | DIN 7504OZ |
Frequently Bought Together
Total Price: £0.00
6.3mm x 16mm Pozidriv Countersunk Self Drilling Screw | DIN 7504OZ | A2 Stainless Steel
This 6.3mm x 16mm Pozidriv self drilling metal screw is suited to control cabinets, equipment housings and mounting brackets where a raised screw head could interfere with another panel, cover or moving component. The self-drilling point can reduce separate pilot-drilling operations in suitable metal while the countersunk head finishes level with the prepared surface. The A2 Stainless Steel construction provides good corrosion resistance for general engineering, sheet-metal fabrication and suitable exposed applications.
What Are Countersunk Self Drilling Screws?
Countersunk Self Tapping Screws with an integrated drill point can reduce separate drilling and tapping stages in compatible sheet metal. Once the point has penetrated the material, the thread engages the metal and the countersunk head seats into a matching recess.
Common Applications
- Sheet Metal Fabrication: Joins panels, overlapping sheets, covers and fabricated components where a flush fixing is preferred.
- Electrical Enclosures: Secures access panels, mounting plates and enclosure components without leaving a prominent raised head.
- Machinery and Equipment: Fastens suitable guards, housings and casings where head clearance needs to be maintained.
- Automotive and Transport: Provides a low-profile fixing for compatible brackets, trim panels and lightweight fabricated components.
6.3mm x 16mm DIN 7504OZ Countersunk Self Drilling Screw Dimensions
- Thread Size: 6.3mm
- Length: 16mm
- Head Height: 3.15mm
- Head Diameter: 11.3mm
- Drive: PZ3
- Standard: DIN 7504OZ
- Material: A2 Stainless Steel
Key Benefits
- DIN 7504OZ identifies the recorded standard or drive format for this product.
- Integrated drill point can reduce the need for a separate pilot hole in suitable metal.
- Low-profile installed finish suits panels, covers and assemblies where clearance is important.
- 3.15mm head height gives the specified countersunk head profile.
See our wider Countersunk Self Drilling Screws category for alternative drive types and sizes. You can also compare other metal fasteners in our complete self drilling metal screws range, including pan head and alternative self-drilling designs. For product-selection support, speak with our team on 01233 713581.
Fri 8.30 am - 3.30 pm