5.5mm x 32mm Torx Countersunk Self Drilling Screw (T25) DIN 7504P | BZP Steel
| Quantity |
Unit Price
(ex. VAT)
|
Unit Price
(inc. VAT)
|
|---|---|---|
| 500 - 1999 | £0.08 | £0.10 |
| 2000 - 4999 | £0.06 | £0.07 |
| 5000 + | £0.05 | £0.06 |
£0.10 / each
Product Specification
| Thread Size | 5.5mm |
| Length | 32mm |
| Drive | T25 |
| Head Diameter | 10.8mm |
| Head Height | 3.40mm |
| Material | Steel BZP |
| Standard | DIN 7504P |
Frequently Bought Together
Total Price: £0.00
5.5mm x 32mm Torx Countersunk Self Drilling Screw | DIN 7504P | Steel BZP
This 5.5mm x 32mm Torx self drilling countersunk screw is designed to drill, form a mating thread and fasten into compatible metal in one installation process. The countersunk head is intended to sit within a matching recess so the finished fixing can remain flush with the surrounding surface. The BZP Steel construction provides a zinc-plated finish for general indoor and suitably protected metal fastening applications.
What Are Countersunk Self Drilling Screws?
Countersunk Self Tapping Screws with an integrated drill point can reduce separate drilling and tapping stages in compatible sheet metal. Once the point has penetrated the material, the thread engages the metal and the countersunk head seats into a matching recess.
Common Applications
- Sheet Metal Fabrication: Joins panels, overlapping sheets, covers and fabricated components where a flush fixing is preferred.
- Electrical Enclosures: Secures access panels, mounting plates and enclosure components without leaving a prominent raised head.
- Machinery and Equipment: Fastens suitable guards, housings and casings where head clearance needs to be maintained.
- Automotive and Transport: Provides a low-profile fixing for compatible brackets, trim panels and lightweight fabricated components.
5.5mm x 32mm DIN 7504P Countersunk Self Drilling Screw Dimensions
- Thread Size: 5.5mm
- Length: 32mm
- Head Height: 3.40mm
- Head Diameter: 10.8mm
- Drive: T25
- Standard: DIN 7504P
- Material: Steel BZP
Key Benefits
- Low-profile installed finish suits panels, covers and assemblies where clearance is important.
- 3.40mm head height gives the specified countersunk head profile.
- DIN 7504P identifies the recorded standard or drive format for this product.
- Integrated drill point can reduce the need for a separate pilot hole in suitable metal.
See our wider Countersunk Self Drilling Screws category for alternative drive types and sizes. For more fastening options, browse our wider self drilling metal screws range to compare different head styles and drive types. For product-selection support, speak with our team on 01233 713581.
Fri 8.30 am - 3.30 pm
