5.5mm x 45mm Torx Countersunk Self Drilling Screw (T25) DIN 7504P | BZP Steel
| Quantity |
Unit Price
(ex. VAT)
|
Unit Price
(inc. VAT)
|
|---|---|---|
| 500 - 1999 | £0.12 | £0.14 |
| 2000 - 4999 | £0.08 | £0.10 |
| 5000 + | £0.07 | £0.08 |
£0.14 / each
Product Specification
| Thread Size | 5.5mm |
| Length | 45mm |
| Drive | T25 |
| Head Diameter | 10.8mm |
| Head Height | 3.40mm |
| Material | Steel BZP |
| Standard | DIN 7504P |
Frequently Bought Together
Total Price: £0.00
5.5mm x 45mm Torx Countersunk Self Drilling Screw | DIN 7504P | Steel BZP
This 5.5mm x 45mm Torx self drilling countersunk screw is suited to automotive brackets, trim and lightweight metal assemblies where a raised screw head could interfere with another panel, cover or moving component. The self-drilling point can reduce separate pilot-drilling operations in suitable metal while the countersunk head finishes level with the prepared surface. The BZP Steel construction provides a zinc-plated finish for general indoor and suitably protected metal fastening applications.
What Are Countersunk Self Drilling Screws?
Countersunk Tek Screws are commonly used for metal-to-metal fastening where both self drilling performance and a flush installed head are required. Correct driver size, material thickness and countersink depth are important for secure installation.
Common Applications
- HVAC and Ventilation: Secures suitable ducting accessories, covers and fabricated metal fittings where a countersunk finish is required.
- Control Cabinets: Provides a flush fixing for mounting plates, panels and compatible metal components in control equipment.
- Signage and Displays: Keeps the fixing head close to the surface on suitable metal signs, frames and display assemblies.
- Workshop Fabrication: Supports general repairs, prototype work and metal assembly using compatible sheet or light-gauge sections.
5.5mm x 45mm DIN 7504P Countersunk Self Drilling Screw Dimensions
- Thread Size: 5.5mm
- Length: 45mm
- Head Height: 3.40mm
- Head Diameter: 10.8mm
- Drive: T25
- Standard: DIN 7504P
- Material: Steel BZP
Key Benefits
- Self-tapping thread forms a mating thread as the screw is driven into compatible material.
- Low-profile installed finish suits panels, covers and assemblies where clearance is important.
- 10.8mm head diameter provides the stated countersunk bearing width.
- DIN 7504P identifies the recorded standard or drive format for this product.
Browse the complete Countersunk Self Drilling Screw collection for other lengths, diameters and materials. You can also compare other metal fasteners in our complete self drilling screws range, including pan head and alternative self-drilling designs. We can help you choose the correct fastener on 01233 713581.
Fri 8.30 am - 3.30 pm
