M20 x 100mm Hex Bolt - Part Threaded (DIN 931) | 8.8 Steel Galvanised
| Quantity |
Unit Price
(ex. VAT)
|
Unit Price
(inc. VAT)
|
|---|---|---|
| 1 - 99 | £1.82 | £2.18 |
| 100 - 499 | £1.40 | £1.68 |
| 500 - 999 | £1.14 | £1.37 |
| 1000 - 4999 | £1.01 | £1.21 |
| 5000 + | £0.91 | £1.09 |
£2.18 / each
Product Specification
| Thread Size | M20 |
| Pitch | 2.50mm |
| Length | 100mm |
| Threaded Length | 46mm |
| Material | 8.8 Steel Galvanised |
| Across Flats | 30mm |
| Head Height | 12.9mm |
| Head Style | Hex Head |
| Standard | DIN 931 |
Frequently Bought Together
Total Price: £0.00
M20 x 100mm Hex Head Bolt DIN 931 | 8.8 Steel Galvanised
This M20 x 100mm hex head bolt is a part threaded DIN 931 fastener for power generation equipment. Its grade 8.8 galvanised steel construction supports secure clamping where a spanner-tightened hexagon head is preferred over a socket drive. It is a practical option for buyers searching for a M20 hex bolt with measured DIN 931 geometry.
The partially threaded design is useful where the shank passes through one component and the threaded end clamps against the mating part, helping reduce movement in bracketed assemblies. The 12.9mm head height gives the installer a clear external drive for workshop and site fitting.
Common Applications
- Fastening generator frames in power generation equipment
- Installing service hatches using M20 metric hardware
- Joining plant skids where 8.8 Steel Galvanised is specified
- Building engine mount brackets requiring DIN 931 part threaded bolts
M20 x 100mm Hex Head Bolt DIN 931 Dimensions
- Thread Size: M20
- Length: 100mm
- Pitch: 2.50mm
- Threaded Length: 46mm
- Across Flats: 30mm
- Head Height: 12.9mm
- Head Style: Hex Head
- Standard: DIN 931
- Material: 8.8 Steel Galvanised
Compatible Fasteners
Most commonly used with Washers and Nuts, these products are used to hold fasteners in place and join two or more parts together. We also offer Socket Head Screws
Our hex head screws are also available as fully threaded Hex Head Screws.
View our full Hex Head Bolts DIN 931 range.
Fri 8.30 am - 3.30 pm