10.2 x 5 mm Natural Nylon Flanged Bushing
| Quantity |
Unit Price
(ex. VAT)
|
Unit Price
(inc. VAT)
|
|---|---|---|
| 1 - 24 | £0.21 | £0.25 |
| 25 - 49 | £0.19 | £0.23 |
| 50 - 99 | £0.17 | £0.20 |
| 100 - 249 | £0.15 | £0.18 |
| 250 - 499 | £0.13 | £0.16 |
| 500 - 999 | £0.12 | £0.14 |
| 1000 + | £0.10 | £0.12 |
£0.25 / each
.png)
Product Specification
| Internal Diameter | 10.2mm |
| Outside Diameter | 14.9mm |
| Flange Diameter | 19.8mm |
| Shaft Length | 2.4mm |
| Colour | Natural |
| Flange Thickness | 2.6mm |
| Material | Polyamide |
Frequently Bought Together
Total Price: £0.00
10.2mm ID x 14.9mm OD Nylon Flanged Bushing | 2.4mm Shaft | Natural
Providing insulation and spacing for component spacing within equipment, this Natural Nylon Flanged Bush has a 10.2mm internal diameter and 14.9mm outside diameter. The sleeve passes through a suitable hole while the flange remains against the surface to help locate the bush and separate adjoining components.
What Are Nylon Flanged Bushes?
Also known as screw insulators or shoulder washers, Nylon Flanged Bushes combine a sleeve with an integral flange. The non-conductive Nylon 6/6 material helps prevent direct electrical contact while the flange can maintain spacing between components and protect the edge of the mounting hole.
Common Applications
- Vibration Damping: Helps reduce direct contact and absorb light vibration or movement between assembled components.
- Automotive Electrical Systems: Provides non-conductive separation around suitable fasteners used in vehicle electrical and electronic assemblies.
- Light Mechanical Assemblies: Acts as a low-mass sleeve or shoulder spacer around compatible shafts, pins and fasteners.
- Control Panels: Insulates compatible fasteners and mounting points in electrical control equipment and enclosure assemblies.
10.2mm ID Nylon Flanged Bushing Dimensions
- Internal Diameter: 10.2mm
- Outside Diameter: 14.9mm
- Flange Diameter: 19.8mm
- Shaft Length: 2.4mm
- Flange Thickness: 2.6mm
- Colour: Natural
- Material: Polyamide
Key Benefits
- 2.4mm shaft length defines the depth of the insulating sleeve through the assembly.
- Heat-stabilised Nylon 6/6 provides a lightweight, non-conductive material for electrical and engineering applications.
- Natural finish provides a neutral appearance that suits internal electrical and engineering assemblies.
- 14.9mm outside diameter provides the main sleeve diameter for the mounting hole.
See alternative flanged bush sizes in the Nylon Bushes category. If you need help selecting an insulating bush for a screw, panel or PCB assembly, call Vital Parts on 01233 713581.
Fri 8.30 am - 3.30 pm