3.0 x 10 mm Natural Nylon Flanged Bushing
| Quantity |
Unit Price
(ex. VAT)
|
Unit Price
(inc. VAT)
|
|---|---|---|
| 1 - 24 | £0.18 | £0.22 |
| 25 - 49 | £0.17 | £0.20 |
| 50 - 99 | £0.15 | £0.18 |
| 100 - 249 | £0.13 | £0.16 |
| 250 - 499 | £0.12 | £0.14 |
| 500 - 999 | £0.10 | £0.12 |
| 1000 + | £0.09 | £0.11 |
£0.22 / each
.png)
Product Specification
| Internal Diameter | 3.0mm |
| Outside Diameter | 6.1mm |
| Flange Diameter | 8.2mm |
| Shaft Length | 8.8mm |
| Colour | Natural |
| Flange Thickness | 1.2mm |
| Material | Polyamide |
Frequently Bought Together
Total Price: £0.00
3mm ID x 6.1mm OD Nylon Flanged Bushing | 8.8mm Shaft | Natural
Designed for control panels and electrical enclosures, this Nylon Flanged Bushing has a 3.0mm internal diameter, 6.1mm outside diameter and 8.8mm shaft length. The Natural heat-stabilised Nylon 6/6 construction provides a non-conductive sleeve and flanged bearing surface for insulating fasteners, spacing components and reducing direct metal-to-metal contact.
What Are Nylon Flanged Bushes?
Nylon Flanged Bushings provide a lightweight alternative to metal bushes where electrical isolation and low-friction separation are important. They are commonly used around screws and fasteners, through panels and within PCB or electronic assemblies where the sleeve and flange help locate and insulate the connection.
Common Applications
- Control Panels: Insulates compatible fasteners and mounting points in electrical control equipment and enclosure assemblies.
- Panel Protection: Provides a sleeve around a mounting hole which can help protect the hole edge from the passing screw or shaft.
- Fastener Isolation: Separates metal screws or pins from the surrounding panel material to reduce direct conductive contact.
- Electrical Screw Insulation: Creates a non-conductive sleeve around compatible screws and fasteners passing through panels or equipment housings.
3mm ID Nylon Flanged Bushing Dimensions
- Internal Diameter: 3.0mm
- Outside Diameter: 6.1mm
- Flange Diameter: 8.2mm
- Shaft Length: 8.8mm
- Flange Thickness: 1.2mm
- Colour: Natural
- Material: Polyamide
Key Benefits
- 8.2mm flange diameter creates a wider bearing surface against the panel or component.
- 1.2mm flange thickness provides the specified flange profile for this SKU.
- Nylon construction can help damp light vibration, movement and shock between assembled components.
- 3.0mm internal diameter provides the bore size for the compatible screw, pin or passing component.
Browse the full Nylon Bushes, Screw Insulators and Shoulder Washers range for additional sizes in Black and Natural finishes. Technical sizing support is available on 01233 713581.
Fri 8.30 am - 3.30 pm
