4.3 x 20 mm Natural Nylon Flanged Bushing
| Quantity |
Unit Price
(ex. VAT)
|
Unit Price
(inc. VAT)
|
|---|---|---|
| 1 - 24 | £0.21 | £0.25 |
| 25 - 49 | £0.19 | £0.23 |
| 50 - 99 | £0.17 | £0.20 |
| 100 - 249 | £0.15 | £0.18 |
| 250 - 499 | £0.13 | £0.16 |
| 500 - 999 | £0.12 | £0.14 |
| 1000 + | £0.10 | £0.12 |
£0.25 / each
Product Specification
| Internal Diameter | 4.3mm |
| Outside Diameter | 6.7mm |
| Flange Diameter | 12.2mm |
| Shaft Length | 18.7mm |
| Colour | Natural |
| Flange Thickness | 1.3mm |
| Material | Polyamide |
Frequently Bought Together
Total Price: £0.00
4.3mm ID x 6.7mm OD Nylon Flanged Bushing | 18.7mm Shaft | Natural
Built for general engineering and light mechanical assemblies, this Nylon Shoulder Washer style bush combines a 4.3mm internal diameter with a 6.7mm outside diameter. The moulded flange and sleeve create a non-conductive interface that can help protect screws, reduce contact between materials and maintain component separation.
What Are Nylon Flanged Bushes?
Also known as screw insulators or shoulder washers, Nylon Flanged Bushes combine a sleeve with an integral flange. The non-conductive Nylon 6/6 material helps prevent direct electrical contact while the flange can maintain spacing between components and protect the edge of the mounting hole.
Common Applications
- PCB Spacing: Helps maintain separation between circuit boards, panels and supporting components where a flanged spacer is suitable.
- Vibration Damping: Helps reduce direct contact and absorb light vibration or movement between assembled components.
- Component Spacing: Maintains a defined gap between compatible parts where the flanged shoulder provides a controlled bearing surface.
- Light Mechanical Assemblies: Acts as a low-mass sleeve or shoulder spacer around compatible shafts, pins and fasteners.
4.3mm ID Nylon Flanged Bushing Dimensions
- Internal Diameter: 4.3mm
- Outside Diameter: 6.7mm
- Flange Diameter: 12.2mm
- Shaft Length: 18.7mm
- Flange Thickness: 1.3mm
- Colour: Natural
- Material: Polyamide
Key Benefits
- Natural finish provides a neutral appearance that suits internal electrical and engineering assemblies.
- 4.3mm internal diameter provides the bore size for the compatible screw, pin or passing component.
- 18.7mm shaft length defines the depth of the insulating sleeve through the assembly.
- Flanged shoulder design supports both insulation and component spacing within one moulded part.
See alternative flanged bush sizes in the Nylon Bushes category. If you need help selecting an insulating bush for a screw, panel or PCB assembly, call Vital Parts on 01233 713581.
Fri 8.30 am - 3.30 pm
