Flanged Nylon Bushes - NYB082
| Quantity |
Unit Price
(ex. VAT)
|
Unit Price
(inc. VAT)
|
|---|---|---|
| 1 - 1 | £0.47 | £0.57 |
| 2 - 999 | £0.43 | £0.52 |
| 1000 - 4999 | £0.40 | £0.48 |
| 5000 + | £0.37 | £0.44 |
£0.57 / each
.png)
Product Specification
| Internal Diameter | 8.1mm |
| Outside Diameter | 9.1mm |
| Flange Diameter | 15.7mm |
| Shaft Length | 4.7mm |
| Colour | Natural |
| Flange Thickness | N/A |
| Material | Polyamide |
Frequently Bought Together
Total Price: £0.00
8.1mm ID x 9.1mm OD Nylon Flanged Bushing | 4.7mm Shaft | Natural
Used within electronic equipment and circuit-board spacing, this Natural Nylon Bush provides a flanged insulating sleeve with a 4.7mm shaft length and 15.7mm flange diameter. The heat-stabilised Nylon 6/6 material is suited to electrical and mechanical assemblies where lightweight isolation and positioning are important.
What Are Nylon Flanged Bushes?
Also known as screw insulators or shoulder washers, Nylon Flanged Bushes combine a sleeve with an integral flange. The non-conductive Nylon 6/6 material helps prevent direct electrical contact while the flange can maintain spacing between components and protect the edge of the mounting hole.
Common Applications
- Light Mechanical Assemblies: Acts as a low-mass sleeve or shoulder spacer around compatible shafts, pins and fasteners.
- Control Panels: Insulates compatible fasteners and mounting points in electrical control equipment and enclosure assemblies.
- Instrument Assemblies: Supports insulated mounting and component spacing in measuring, control and instrumentation equipment.
- Fastener Isolation: Separates metal screws or pins from the surrounding panel material to reduce direct conductive contact.
8.1mm ID Nylon Flanged Bushing Dimensions
- Internal Diameter: 8.1mm
- Outside Diameter: 9.1mm
- Flange Diameter: 15.7mm
- Shaft Length: 4.7mm
- Colour: Natural
- Material: Polyamide
Key Benefits
- Heat-stabilised Nylon 6/6 provides a lightweight, non-conductive material for electrical and engineering applications.
- Nylon construction can help damp light vibration, movement and shock between assembled components.
- 8.1mm internal diameter provides the bore size for the compatible screw, pin or passing component.
- 4.7mm shaft length defines the depth of the insulating sleeve through the assembly.
View the complete Nylon Bushes range to compare Black and Natural options across a wide selection of internal diameters, flange diameters and shaft lengths. For help selecting the correct bush size, contact the Vital Parts technical sales team on 01233 713581.
Fri 8.30 am - 3.30 pm
