Flanged Nylon Bushes - NYB091
| Quantity |
Unit Price
(ex. VAT)
|
Unit Price
(inc. VAT)
|
|---|---|---|
| 1 - 1 | £1.02 | £1.22 |
| 2 - 999 | £1.02 | £1.22 |
| 1000 - 4999 | £0.87 | £1.04 |
| 5000 + | £0.72 | £0.87 |
£1.22 / each
.png)
Product Specification
| Internal Diameter | 10.0mm |
| Outside Diameter | 14.0mm |
| Flange Diameter | 20.0mm |
| Shaft Length | 8.0mm |
| Colour | Natural |
| Flange Thickness | 2.0mm |
| Material | Polyamide |
Frequently Bought Together
Total Price: £0.00
10mm ID x 14mm OD Nylon Flanged Bushing | 8mm Shaft | Natural
Providing insulation and spacing for sensor housings and electronic modules, this Natural Nylon Flanged Bush has a 10.0mm internal diameter and 14.0mm outside diameter. The sleeve passes through a suitable hole while the flange remains against the surface to help locate the bush and separate adjoining components.
What Are Nylon Flanged Bushes?
Also known as screw insulators or shoulder washers, Nylon Flanged Bushes combine a sleeve with an integral flange. The non-conductive Nylon 6/6 material helps prevent direct electrical contact while the flange can maintain spacing between components and protect the edge of the mounting hole.
Common Applications
- Electronic Equipment: Provides lightweight separation around screws, pins and mounting points within electronic housings.
- Instrument Assemblies: Supports insulated mounting and component spacing in measuring, control and instrumentation equipment.
- Equipment Housings: Provides an insulating bush through suitable holes in machinery covers, enclosures and equipment panels.
- PCB Spacing: Helps maintain separation between circuit boards, panels and supporting components where a flanged spacer is suitable.
10mm ID Nylon Flanged Bushing Dimensions
- Internal Diameter: 10.0mm
- Outside Diameter: 14.0mm
- Flange Diameter: 20.0mm
- Shaft Length: 8.0mm
- Flange Thickness: 2.0mm
- Colour: Natural
- Material: Polyamide
Key Benefits
- 8.0mm shaft length defines the depth of the insulating sleeve through the assembly.
- Heat-stabilised Nylon 6/6 provides a lightweight, non-conductive material for electrical and engineering applications.
- Natural finish provides a neutral appearance that suits internal electrical and engineering assemblies.
- 14.0mm outside diameter provides the main sleeve diameter for the mounting hole.
See alternative flanged bush sizes in the Nylon Bushes category. If you need help selecting an insulating bush for a screw, panel or PCB assembly, call Vital Parts on 01233 713581.
Fri 8.30 am - 3.30 pm