6.3mm x 38mm Torx Pan Self Drilling Screw DIN 7504MT | A2 Stainless Steel
| Quantity |
Unit Price
(ex. VAT)
|
Unit Price
(inc. VAT)
|
|---|---|---|
| 200 - 1999 | £0.23 | £0.28 |
| 2000 - 4999 | £0.17 | £0.20 |
| 5000 + | £0.12 | £0.15 |
£0.28 / each
.png)
Product Specification
| Thread Size | 6.3mm |
| Thread Length | 38mm |
| Drive | TX30 |
| Head Diameter | 12.0mm |
| Head Height | 4.6mm |
| Material | A2 Stainless Steel |
| Standard | DIN 7504MT |
Frequently Bought Together
Total Price: £0.00
6.3mm x 38mm Torx Pan Head Self Drilling Screw | DIN 7504MT | A2 Stainless Steel
This 6.3mm x 38mm Torx self drilling screw is suited to equipment covers and non-critical engineering assemblies where a pan head is preferred over a countersunk fixing. The slightly domed top gives a compact finish while the flat bearing face helps clamp panels, brackets and covers securely. The A2 Stainless Steel construction provides good corrosion resistance for general engineering, fabrication and suitable exposed applications.
What Are Pan Head Self Drilling Screws?
Self Drilling Screws use a hardened drill-shaped point to penetrate suitable metal before the screw thread engages. Pan head versions are useful where a visible low-profile head and good clamping area are preferred over a countersunk finish. DIN 7504MT specifies a pan head self drilling screw with a Torx or hexalobular recess.
Common Applications
- Automotive and Transport: Secures compatible trim panels, brackets, housings and lightweight fabricated components.
- General Construction: Fastens suitable metal framing accessories, brackets, fixtures and sheet-metal components.
- Control Panels: Provides a quick fixing for covers, mounting plates and internal hardware on compatible metal panels.
- Workshop Fabrication: Supports repairs, prototype work and general assembly where self drilling into suitable metal is useful.
6.3mm x 38mm DIN 7504MT Pan Head Self Drilling Screw Dimensions
- Thread Size: 6.3mm
- Thread Length: 38mm
- Head Height: 4.6mm
- Head Diameter: 12.0mm
- Drive: TX30
- Standard: DIN 7504MT
- Material: A2 Stainless Steel
Key Benefits
- TX30 drive matches the specified driver or bit for installation.
- A2 Stainless Steel construction provides the specified material and finish for the application.
- Flat underside of the pan head provides a broad clamping surface against panels and brackets.
- 6.3mm thread diameter with 38mm thread length provides the main screw dimensions.
Compare more sizes in our Pan Head Self Drilling Screws range. For different head shapes and drive options, browse our wider Self Drilling Screws range for more self-drilling and self-threading fasteners. If you are unsure which standard or drive suits your application, contact our team on 01233 713581.
Fri 8.30 am - 3.30 pm