6.3mm x 25mm Pozi Pan Head Self Drilling Screw DIN 7504MZ | A2 Stainless Steel
| Quantity |
Unit Price
(ex. VAT)
|
Unit Price
(inc. VAT)
|
|---|---|---|
| 200 - 1999 | £0.20 | £0.24 |
| 2000 - 4999 | £0.14 | £0.17 |
| 5000 + | £0.11 | £0.13 |
£0.24 / each
Product Specification
| Thread Size | 6.3mm |
| Thread Length | 25mm |
| Drive | PZ3 |
| Head Diameter | 12.0mm |
| Head Height | 4.6mm |
| Material | A2 Stainless Steel |
| Standard | DIN 7504MZ |
Frequently Bought Together
Total Price: £0.00
6.3mm x 25mm Pozidriv Pan Head Self Drilling Screw | DIN 7504MZ | A2 Stainless Steel
Designed for equipment covers and non-critical engineering assemblies, this 6.3mm x 25mm pan head self drilling screw combines an integrated drill point with a self-tapping thread. The rounded pan head gives a neat installed finish while its flat underside provides a broad bearing surface against the fixed component. The A2 Stainless Steel construction provides good corrosion resistance for general engineering, fabrication and suitable exposed applications.
What Are Pan Head Self Drilling Screws?
Pan Head Self Drilling Screws combine a drill point and self-tapping thread in one fastener. The point cuts through compatible sheet metal before the threaded section forms a mating thread, allowing the screw to drill and fasten during the same operation in suitable materials. DIN 7504MZ specifies a pan head self drilling screw with a Pozidriv recess.
Common Applications
- Automotive and Transport: Secures compatible trim panels, brackets, housings and lightweight fabricated components.
- General Construction: Fastens suitable metal framing accessories, brackets, fixtures and sheet-metal components.
- Control Panels: Provides a quick fixing for covers, mounting plates and internal hardware on compatible metal panels.
- Workshop Fabrication: Supports repairs, prototype work and general assembly where self drilling into suitable metal is useful.
6.3mm x 25mm DIN 7504MZ Pan Head Self Drilling Screw Dimensions
- Thread Size: 6.3mm
- Thread Length: 25mm
- Head Height: 4.6mm
- Head Diameter: 12.0mm
- Drive: PZ3
- Standard: DIN 7504MZ
- Material: A2 Stainless Steel
Key Benefits
- Flat underside of the pan head provides a broad clamping surface against panels and brackets.
- 6.3mm thread diameter with 25mm thread length provides the main screw dimensions.
- PZ3 drive matches the specified driver or bit for installation.
- A2 Stainless Steel construction provides the specified material and finish for the application.
Compare more sizes in our Pan Head Self Drilling Screws range. You can compare other self-drilling and self-threading screw options in our full Self Drilling Screws collection. If you are unsure which standard or drive suits your application, contact our team on 01233 713581.
Fri 8.30 am - 3.30 pm