M10 x 25mm Socket Grub Screw - Flat Point (DIN 913) | Marine Grade A4 Stainless Steel
| Quantity |
Unit Price
(ex. VAT)
|
Unit Price
(inc. VAT)
|
|---|---|---|
| 1 - 99 | £0.40 | £0.48 |
| 100 - 499 | £0.33 | £0.40 |
| 500 - 999 | £0.29 | £0.35 |
| 1000 - 4999 | £0.25 | £0.30 |
| 5000 + | £0.23 | £0.27 |
£0.48 / each
.png)
Product Specification
| Thread Size | M10 |
| Length | 25.0mm |
| Pitch | 1.50mm |
| End Type | Flat |
| Drive | H5 |
| Standard | DIN 913 / ISO 4026 |
| Material | A4 Stainless Steel |
Frequently Bought Together
Total Price: £0.00
M10 x 25mm Flat Point Socket Grub Screw | H5 Drive | A4 Stainless Steel
The M10 x 25mm socket grub screw with flat point is intended for laboratory equipment and similar precision assemblies. A 1.50mm thread pitch gives consistent engagement while the flat point supports contact on shafts, collars and machined faces. As a stainless grub screw, it is well suited to benchtop frames, instrument mounts and calibration fixtures because it allows controlled adjustment without bulky external heads.
Manufactured from A4 stainless steel, this flat point grub screw is appropriate for coastal, chemical-adjacent and wet area applications when used with compatible parts. Its DIN 913 form is often chosen for collars, hubs and adjustment points where a cup point would be too aggressive for the surface being retained. It is a good option for buyers comparing corrosion-resistant grub screws for harsher service conditions.
Common Applications
- Benchtop frames, instrument mounts and calibration fixtures using a M10 x 25mm flat point set screw
- Locking pulleys and gear hubs on compatible shafts
- Holding stop blocks inside jigs and fixtures
- Flush fastening in machined assemblies
Key Features and Benefits
- Useful for locking shafts, collars and stops after alignment has been checked
- Socket drive keeps the fixing accessible even where side clearance is limited
- Flat point end type reduces localised marking compared with sharper set screw points
- Available as part of a wider metric grub screw range for stocked maintenance spares
M10 x 25mm A4 Stainless Steel Flat Point Socket Grub Screw Dimensions
- Thread Size: M10
- Length: 25mm
- Pitch: 1.50mm
- End Type: Flat
- Drive: H5
- Material: A4 Stainless Steel
- Colour: Self-colour
- Standard: DIN 913 / ISO 4026
Further Reading
View our full range of Socket Grub Screw Flat DIN 913 here: Socket Grub Screw Flat DIN 913.
Need help or buying in bulk? Call our team on 01233 713581.
Fri 8.30 am - 3.30 pm