3.9mm x 22mm Phillips Countersunk Self Drilling Screw (PH2) DIN 7504OH | A2 Stainless Steel
| Quantity |
Unit Price
(ex. VAT)
|
Unit Price
(inc. VAT)
|
|---|---|---|
| 1000 - 1999 | £0.07 | £0.08 |
| 2000 - 4999 | £0.05 | £0.06 |
| 5000 + | £0.04 | £0.05 |
£0.08 / each
Product Specification
| Thread Size | 3.9mm |
| Length | 22mm |
| Drive | PH2 |
| Head Diameter | 7.5mm |
| Head Height | 2.50mm |
| Material | A2 Stainless Steel |
| Standard | DIN 7504OH |
Frequently Bought Together
Total Price: £0.00
3.9mm x 22mm Phillips Countersunk Self Drilling Screw | DIN 7504OH | A2 Stainless Steel
This 3.9mm x 22mm Phillips countersunk metal screw is suited to sheet-metal panels, covers and fabricated assemblies where a raised screw head could interfere with another panel, cover or moving component. The self-drilling point can reduce separate pilot-drilling operations in suitable metal while the countersunk head finishes level with the prepared surface. The A2 Stainless Steel construction provides good corrosion resistance for general engineering, sheet-metal fabrication and suitable exposed applications.
What Are Countersunk Self Drilling Screws?
Countersunk Tek Screws are commonly used for metal-to-metal fastening where both self drilling performance and a flush installed head are required. Correct driver size, material thickness and countersink depth are important for secure installation.
Common Applications
- HVAC and Ventilation: Secures suitable ducting accessories, covers and fabricated metal fittings where a countersunk finish is required.
- Control Cabinets: Provides a flush fixing for mounting plates, panels and compatible metal components in control equipment.
- Signage and Displays: Keeps the fixing head close to the surface on suitable metal signs, frames and display assemblies.
- Workshop Fabrication: Supports general repairs, prototype work and metal assembly using compatible sheet or light-gauge sections.
3.9mm x 22mm DIN 7504OH Countersunk Self Drilling Screw Dimensions
- Thread Size: 3.9mm
- Length: 22mm
- Head Height: 2.50mm
- Head Diameter: 7.5mm
- Drive: PH2
- Standard: DIN 7504OH
- Material: A2 Stainless Steel
Key Benefits
- 7.5mm head diameter provides the stated countersunk bearing width.
- DIN 7504OH identifies the recorded standard or drive format for this product.
- Self-tapping thread forms a mating thread as the screw is driven into compatible material.
- Low-profile installed finish suits panels, covers and assemblies where clearance is important.
Browse the complete Countersunk Self Drilling Screw collection for other lengths, diameters and materials. We also stock other styles in our metal self drilling screws range, including alternative head profiles, drives and materials. We can help you choose the correct fastener on 01233 713581.
Fri 8.30 am - 3.30 pm
