3.9mm x 32mm Phillips Countersunk Self Drilling Screw (PH2) DIN 7504OH | A2 Stainless Steel
| Quantity |
Unit Price
(ex. VAT)
|
Unit Price
(inc. VAT)
|
|---|---|---|
| 1000 - 1999 | £0.08 | £0.10 |
| 2000 - 4999 | £0.06 | £0.07 |
| 5000 + | £0.04 | £0.05 |
£0.10 / each
.png)
Product Specification
| Thread Size | 3.9mm |
| Length | 32mm |
| Drive | PH2 |
| Head Diameter | 7.5mm |
| Head Height | 2.50mm |
| Material | A2 Stainless Steel |
| Standard | DIN 7504OH |
Frequently Bought Together
Total Price: £0.00
3.9mm x 32mm Phillips Countersunk Self Drilling Screw | DIN 7504OH | A2 Stainless Steel
This 3.9mm x 32mm Phillips self drilling metal screw is suited to general construction metalwork where a flush fixing is required where a raised screw head could interfere with another panel, cover or moving component. The self-drilling point can reduce separate pilot-drilling operations in suitable metal while the countersunk head finishes level with the prepared surface. The A2 Stainless Steel construction provides good corrosion resistance for general engineering, sheet-metal fabrication and suitable exposed applications.
What Are Countersunk Self Drilling Screws?
Countersunk Self Drilling Screws combine a drill point, self-tapping thread and tapered head in one fastener. The point creates the installation hole in compatible metal, the thread forms its mating path and the countersunk head seats into a prepared recess for a flush finish.
Common Applications
- Sheet Metal Fabrication: Joins panels, overlapping sheets, covers and fabricated components where a flush fixing is preferred.
- Electrical Enclosures: Secures access panels, mounting plates and enclosure components without leaving a prominent raised head.
- Machinery and Equipment: Fastens suitable guards, housings and casings where head clearance needs to be maintained.
- Automotive and Transport: Provides a low-profile fixing for compatible brackets, trim panels and lightweight fabricated components.
3.9mm x 32mm DIN 7504OH Countersunk Self Drilling Screw Dimensions
- Thread Size: 3.9mm
- Length: 32mm
- Head Height: 2.50mm
- Head Diameter: 7.5mm
- Drive: PH2
- Standard: DIN 7504OH
- Material: A2 Stainless Steel
Key Benefits
- DIN 7504OH identifies the recorded standard or drive format for this product.
- Integrated drill point can reduce the need for a separate pilot hole in suitable metal.
- Low-profile installed finish suits panels, covers and assemblies where clearance is important.
- 2.50mm head height gives the specified countersunk head profile.
See our wider Countersunk Self Drilling Screws category for alternative drive types and sizes. Our broader self tapping screws for metal range includes additional head types, drive options and material finishes for compatible metal applications. For product-selection support, speak with our team on 01233 713581.
Fri 8.30 am - 3.30 pm
