Flanged Nylon Bushes - NYB059
| Quantity |
Unit Price
(ex. VAT)
|
Unit Price
(inc. VAT)
|
|---|---|---|
| 1 - 1 | £0.18 | £0.22 |
| 2 - 999 | £0.18 | £0.22 |
| 1000 - 4999 | £0.16 | £0.19 |
| 5000 + | £0.12 | £0.15 |
£0.22 / each
.png)
Product Specification
| Internal Diameter | 5.1mm |
| Outside Diameter | 6.6mm |
| Flange Diameter | 10.1mm |
| Shaft Length | 3.2mm |
| Colour | Natural |
| Flange Thickness | N/A |
| Material | Polyamide |
Frequently Bought Together
Total Price: £0.00
5.1mm ID x 6.6mm OD Nylon Flanged Bushing | 3.2mm Shaft | Natural
Built for electronic equipment and circuit-board spacing, this Nylon Shoulder Washer style bush combines a 5.1mm internal diameter with a 6.6mm outside diameter. The moulded flange and sleeve create a non-conductive interface that can help protect screws, reduce contact between materials and maintain component separation.
What Are Nylon Flanged Bushes?
Also known as screw insulators or shoulder washers, Nylon Flanged Bushes combine a sleeve with an integral flange. The non-conductive Nylon 6/6 material helps prevent direct electrical contact while the flange can maintain spacing between components and protect the edge of the mounting hole.
Common Applications
- Automotive Electrical Systems: Provides non-conductive separation around suitable fasteners used in vehicle electrical and electronic assemblies.
- Equipment Housings: Provides an insulating bush through suitable holes in machinery covers, enclosures and equipment panels.
- Control Panels: Insulates compatible fasteners and mounting points in electrical control equipment and enclosure assemblies.
- Panel Protection: Provides a sleeve around a mounting hole which can help protect the hole edge from the passing screw or shaft.
5.1mm ID Nylon Flanged Bushing Dimensions
- Internal Diameter: 5.1mm
- Outside Diameter: 6.6mm
- Flange Diameter: 10.1mm
- Shaft Length: 3.2mm
- Colour: Natural
- Material: Polyamide
Key Benefits
- 5.1mm internal diameter provides the bore size for the compatible screw, pin or passing component.
- 10.1mm flange diameter creates a wider bearing surface against the panel or component.
- Heat-stabilised Nylon 6/6 provides a lightweight, non-conductive material for electrical and engineering applications.
- Natural finish provides a neutral appearance that suits internal electrical and engineering assemblies.
View the complete Nylon Bushes range to compare Black and Natural options across a wide selection of internal diameters, flange diameters and shaft lengths. For help selecting the correct bush size, contact the Vital Parts technical sales team on 01233 713581.
Fri 8.30 am - 3.30 pm
