Flanged Nylon Bushes - NYB104
| Quantity |
Unit Price
(ex. VAT)
|
Unit Price
(inc. VAT)
|
|---|---|---|
| 1 - 1 | £0.89 | £1.07 |
| 2 - 999 | £0.88 | £1.05 |
| 1000 - 4999 | £0.86 | £1.03 |
| 5000 + | £0.84 | £1.01 |
£1.07 / each
Product Specification
| Internal Diameter | 12.2mm |
| Outside Diameter | 13.8mm |
| Flange Diameter | 25.0mm |
| Shaft Length | 2.0mm |
| Colour | Natural |
| Flange Thickness | N/A |
| Material | Polyamide |
Frequently Bought Together
Total Price: £0.00
12.2mm ID x 13.8mm OD Nylon Flanged Bushing | 2mm Shaft | Natural
This Natural Nylon Flanged Bushing is suited to electronic equipment and circuit-board spacing where electrical isolation, spacing or vibration damping is required. Its 25.0mm flange diameter provides a bearing face while the 2.0mm shaft extends into the mounting hole to insulate or locate the passing fastener.
What Are Nylon Flanged Bushes?
Nylon Bushes are flanged insulating sleeves used to separate screws, shafts or other passing components from the surrounding material. The shoulder-style flange provides a bearing face while the cylindrical sleeve fits into the mounting hole which makes the component useful for electrical insulation, spacing and vibration damping.
Common Applications
- Vibration Damping: Helps reduce direct contact and absorb light vibration or movement between assembled components.
- Automotive Electrical Systems: Provides non-conductive separation around suitable fasteners used in vehicle electrical and electronic assemblies.
- Light Mechanical Assemblies: Acts as a low-mass sleeve or shoulder spacer around compatible shafts, pins and fasteners.
- Control Panels: Insulates compatible fasteners and mounting points in electrical control equipment and enclosure assemblies.
12.2mm ID Nylon Flanged Bushing Dimensions
- Internal Diameter: 12.2mm
- Outside Diameter: 13.8mm
- Flange Diameter: 25.0mm
- Shaft Length: 2.0mm
- Colour: Natural
- Material: Polyamide
Key Benefits
- Nylon construction can help damp light vibration, movement and shock between assembled components.
- Suitable as a screw insulator, shoulder washer or flanged spacer in correctly sized assemblies.
- 25.0mm flange diameter creates a wider bearing surface against the panel or component.
- Heat-stabilised Nylon 6/6 provides a lightweight, non-conductive material for electrical and engineering applications.
Browse the full Nylon Bushes, Screw Insulators and Shoulder Washers range for additional sizes in Black and Natural finishes. Technical sizing support is available on 01233 713581.
Fri 8.30 am - 3.30 pm
