Flanged Nylon Bushes - NYB109
| Quantity |
Unit Price
(ex. VAT)
|
Unit Price
(inc. VAT)
|
|---|---|---|
| 1 - 1 | £1.34 | £1.61 |
| 2 - 999 | £1.34 | £1.61 |
| 1000 - 4999 | £1.15 | £1.38 |
| 5000 + | £0.96 | £1.15 |
£1.61 / each
.png)
Product Specification
| Internal Diameter | 16.2mm |
| Outside Diameter | 17.8mm |
| Flange Diameter | 32.0mm |
| Shaft Length | 6.0mm |
| Colour | Natural |
| Flange Thickness | N/A |
| Material | Polyamide |
Frequently Bought Together
Total Price: £0.00
16.2mm ID x 17.8mm OD Nylon Flanged Bushing | 6mm Shaft | Natural
Designed to separate and protect components in PCB assemblies and electrical insulation, this Nylon Flanged Bushing uses a 16.2mm bore with a 17.8mm outside diameter. The sleeve helps isolate the passing component while the flange creates a wider contact face at the panel or mounting surface.
What Are Nylon Flanged Bushes?
A Nylon Shoulder Bushing uses a cylindrical sleeve to pass through a hole with a flange that remains on the surface. This geometry allows the bush to insulate a compatible fastener, provide a controlled spacing point and help absorb light vibration or movement within the assembly.
Common Applications
- Vibration Damping: Helps reduce direct contact and absorb light vibration or movement between assembled components.
- Automotive Electrical Systems: Provides non-conductive separation around suitable fasteners used in vehicle electrical and electronic assemblies.
- Light Mechanical Assemblies: Acts as a low-mass sleeve or shoulder spacer around compatible shafts, pins and fasteners.
- Control Panels: Insulates compatible fasteners and mounting points in electrical control equipment and enclosure assemblies.
16.2mm ID Nylon Flanged Bushing Dimensions
- Internal Diameter: 16.2mm
- Outside Diameter: 17.8mm
- Flange Diameter: 32.0mm
- Shaft Length: 6.0mm
- Colour: Natural
- Material: Polyamide
Key Benefits
- 32.0mm flange diameter creates a wider bearing surface against the panel or component.
- Flanged profile provides a defined bearing face while the sleeve passes through the mounting hole.
- Nylon construction can help damp light vibration, movement and shock between assembled components.
- 16.2mm internal diameter provides the bore size for the compatible screw, pin or passing component.
Browse the full Nylon Bushes, Screw Insulators and Shoulder Washers range for additional sizes in Black and Natural finishes. Technical sizing support is available on 01233 713581.
Fri 8.30 am - 3.30 pm
