Flanged Nylon Bushes - NYB110
| Quantity |
Unit Price
(ex. VAT)
|
Unit Price
(inc. VAT)
|
|---|---|---|
| 1 - 1 | £3.34 | £4.01 |
| 2 - 999 | £3.14 | £3.77 |
| 1000 - 4999 | £2.95 | £3.54 |
| 5000 + | £2.71 | £3.25 |
£4.01 / each
.png)
Product Specification
| Internal Diameter | 20.1mm |
| Outside Diameter | 26.7mm |
| Flange Diameter | 31.9mm |
| Shaft Length | 20.0mm |
| Colour | Natural |
| Flange Thickness | N/A |
| Material | Polyamide |
Frequently Bought Together
Total Price: £0.00
20.1mm ID x 26.7mm OD Nylon Flanged Bushing | 20mm Shaft | Natural
For applications involving electrical fastener insulation, this Natural Nylon Shoulder Bushing provides a lightweight insulating interface with a 20.0mm shaft length and 31.9mm flange diameter. The component can support screw insulation, PCB spacing and vibration reduction in correctly sized mounting holes.
What Are Nylon Flanged Bushes?
A Nylon Shoulder Bushing uses a cylindrical sleeve to pass through a hole with a flange that remains on the surface. This geometry allows the bush to insulate a compatible fastener, provide a controlled spacing point and help absorb light vibration or movement within the assembly.
Common Applications
- Light Mechanical Assemblies: Acts as a low-mass sleeve or shoulder spacer around compatible shafts, pins and fasteners.
- Control Panels: Insulates compatible fasteners and mounting points in electrical control equipment and enclosure assemblies.
- Instrument Assemblies: Supports insulated mounting and component spacing in measuring, control and instrumentation equipment.
- Fastener Isolation: Separates metal screws or pins from the surrounding panel material to reduce direct conductive contact.
20.1mm ID Nylon Flanged Bushing Dimensions
- Internal Diameter: 20.1mm
- Outside Diameter: 26.7mm
- Flange Diameter: 31.9mm
- Shaft Length: 20.0mm
- Colour: Natural
- Material: Polyamide
Key Benefits
- 20.0mm shaft length defines the depth of the insulating sleeve through the assembly.
- Heat-stabilised Nylon 6/6 provides a lightweight, non-conductive material for electrical and engineering applications.
- Natural finish provides a neutral appearance that suits internal electrical and engineering assemblies.
- 26.7mm outside diameter provides the main sleeve diameter for the mounting hole.
See alternative flanged bush sizes in the Nylon Bushes category. If you need help selecting an insulating bush for a screw, panel or PCB assembly, call Vital Parts on 01233 713581.
Fri 8.30 am - 3.30 pm
