6.3mm x 25mm Phillips Pan Head Self Drilling Screw DIN 7504MH | A2 Stainless Steel
| Quantity |
Unit Price
(ex. VAT)
|
Unit Price
(inc. VAT)
|
|---|---|---|
| 200 - 1999 | £0.23 | £0.27 |
| 2000 - 4999 | £0.17 | £0.20 |
| 5000 + | £0.12 | £0.15 |
£0.27 / each
Product Specification
| Thread Size | 6.3mm |
| Thread Length | 25mm |
| Drive | PH3 |
| Head Diameter | 12.0mm |
| Head Height | 4.6mm |
| Material | A2 Stainless Steel |
| Standard | DIN 7504MH |
Frequently Bought Together
Total Price: £0.00
6.3mm x 25mm Phillips Pan Head Self Drilling Screw | DIN 7504MH | A2 Stainless Steel
Made for efficient metal fastening, this 6.3mm x 25mm pan head self drilling screw uses a drill-shaped point to penetrate compatible material before the thread forms its mating path. The PH3 drive provides the specified tool engagement for controlled installation. The A2 Stainless Steel construction provides good corrosion resistance for general engineering, fabrication and suitable exposed applications.
What Are Pan Head Self Drilling Screws?
Pan Head Tek Screws are self drilling fasteners commonly used for metal-to-metal fixing. Their integrated drill point can remove separate drilling and tapping stages in many suitable applications while the drive recess allows installation with a compatible manual or powered driver. DIN 7504MH specifies a pan head self drilling screw with a Phillips recess.
Common Applications
- Sheet Metal Fabrication: Joins overlapping sheets, lightweight sections, covers and fabricated metal components.
- Electrical Enclosures: Secures panels, access covers, mounting plates and internal brackets in suitable enclosures.
- HVAC and Ventilation: Fastens ducting, vents, air-handling components and associated metal fittings.
- Machinery and Equipment: Provides a practical fixing for guards, casings, control panels and light equipment assemblies.
6.3mm x 25mm DIN 7504MH Pan Head Self Drilling Screw Dimensions
- Thread Size: 6.3mm
- Thread Length: 25mm
- Head Height: 4.6mm
- Head Diameter: 12.0mm
- Drive: PH3
- Standard: DIN 7504MH
- Material: A2 Stainless Steel
Key Benefits
- Self-tapping thread forms a mating thread as the screw is installed into compatible material.
- Rounded pan head creates a neat compact finish where a countersunk recess is not required.
- 12.0mm head diameter provides the bearing width beneath the rounded head.
- DIN 7504MH identifies the standard or drive format for this product.
See our wider Pan Head Self Drilling Screws category for alternative standards and drive types. We also stock other self-drilling and self-threading fastening styles in our complete Self Drilling Screws range. For product-selection support, speak with our team on 01233 713581.
Fri 8.30 am - 3.30 pm
