3.5mm x 22mm Torx Pan Self Drilling Screw DIN 7504MT | A2 Stainless Steel
| Quantity |
Unit Price
(ex. VAT)
|
Unit Price
(inc. VAT)
|
|---|---|---|
| 1000 - 1999 | £0.08 | £0.10 |
| 2000 - 4999 | £0.06 | £0.07 |
| 5000 + | £0.04 | £0.05 |
£0.10 / each
.png)
Product Specification
| Thread Size | 3.5mm |
| Thread Length | 22mm |
| Drive | TX10 |
| Head Diameter | 7.0mm |
| Head Height | 2.6mm |
| Material | A2 Stainless Steel |
| Standard | DIN 7504MT |
Frequently Bought Together
Total Price: £0.00
3.5mm x 22mm Torx Pan Head Self Drilling Screw | DIN 7504MT | A2 Stainless Steel
Made for efficient metal fastening, this 3.5mm x 22mm pan head self drilling screw uses a drill-shaped point to penetrate compatible material before the thread forms its mating path. The TX10 drive provides the specified tool engagement for controlled installation. The A2 Stainless Steel construction provides good corrosion resistance for general engineering, fabrication and suitable exposed applications.
What Are Pan Head Self Drilling Screws?
Pan Head Self Drilling Screws combine a drill point and self-tapping thread in one fastener. The point cuts through compatible sheet metal before the threaded section forms a mating thread, allowing the screw to drill and fasten during the same operation in suitable materials. DIN 7504MT specifies a pan head self drilling screw with a Torx or hexalobular recess.
Common Applications
- Sheet Metal Fabrication: Joins overlapping sheets, lightweight sections, covers and fabricated metal components.
- Electrical Enclosures: Secures panels, access covers, mounting plates and internal brackets in suitable enclosures.
- HVAC and Ventilation: Fastens ducting, vents, air-handling components and associated metal fittings.
- Machinery and Equipment: Provides a practical fixing for guards, casings, control panels and light equipment assemblies.
3.5mm x 22mm DIN 7504MT Pan Head Self Drilling Screw Dimensions
- Thread Size: 3.5mm
- Thread Length: 22mm
- Head Height: 2.6mm
- Head Diameter: 7.0mm
- Drive: TX10
- Standard: DIN 7504MT
- Material: A2 Stainless Steel
Key Benefits
- 7.0mm head diameter provides the bearing width beneath the rounded head.
- DIN 7504MT identifies the standard or drive format for this product.
- Self-tapping thread forms a mating thread as the screw is installed into compatible material.
- Rounded pan head creates a neat compact finish where a countersunk recess is not required.
Compare more sizes in our Pan Head Self Drilling Screws range. For different head shapes and drive options, browse our wider Self Drilling Screws range for more self-drilling and self-threading fasteners. If you are unsure which standard or drive suits your application, contact our team on 01233 713581.
Fri 8.30 am - 3.30 pm