3.9mm x 22mm Torx Pan Self Drilling Screw DIN 7504MT | A2 Stainless Steel
| Quantity |
Unit Price
(ex. VAT)
|
Unit Price
(inc. VAT)
|
|---|---|---|
| 1000 - 1999 | £0.08 | £0.10 |
| 2000 - 4999 | £0.06 | £0.07 |
| 5000 + | £0.05 | £0.06 |
£0.10 / each
Product Specification
| Thread Size | 3.9mm |
| Thread Length | 22mm |
| Drive | TX15 |
| Head Diameter | 7.5mm |
| Head Height | 2.8mm |
| Material | A2 Stainless Steel |
| Standard | DIN 7504MT |
Frequently Bought Together
Total Price: £0.00
3.9mm x 22mm Torx Pan Head Self Drilling Screw | DIN 7504MT | A2 Stainless Steel
Providing drilling and fastening in one operation, this 3.9mm x 22mm pan head self drilling screw is suited to equipment covers and non-critical engineering assemblies. Its TX15 drive, 7.5mm head diameter and 2.8mm head height provide the key installation dimensions for this fastener. The A2 Stainless Steel construction provides good corrosion resistance for general engineering, fabrication and suitable exposed applications.
What Are Pan Head Self Drilling Screws?
Pan Head Tek Screws are self drilling fasteners commonly used for metal-to-metal fixing. Their integrated drill point can remove separate drilling and tapping stages in many suitable applications while the drive recess allows installation with a compatible manual or powered driver. DIN 7504MT specifies a pan head self drilling screw with a Torx or hexalobular recess.
Common Applications
- Automotive and Transport: Secures compatible trim panels, brackets, housings and lightweight fabricated components.
- General Construction: Fastens suitable metal framing accessories, brackets, fixtures and sheet-metal components.
- Control Panels: Provides a quick fixing for covers, mounting plates and internal hardware on compatible metal panels.
- Workshop Fabrication: Supports repairs, prototype work and general assembly where self drilling into suitable metal is useful.
3.9mm x 22mm DIN 7504MT Pan Head Self Drilling Screw Dimensions
- Thread Size: 3.9mm
- Thread Length: 22mm
- Head Height: 2.8mm
- Head Diameter: 7.5mm
- Drive: TX15
- Standard: DIN 7504MT
- Material: A2 Stainless Steel
Key Benefits
- Rounded pan head creates a neat compact finish where a countersunk recess is not required.
- 2.8mm head height gives the stated pan-head profile.
- DIN 7504MT identifies the standard or drive format for this product.
- Integrated drill point can reduce separate pilot-drilling operations in suitable metal.
See our wider Pan Head Self Drilling Screws category for alternative standards and drive types. We also stock other self-drilling and self-threading fastening styles in our complete Self Drilling Screws range. For product-selection support, speak with our team on 01233 713581.
Fri 8.30 am - 3.30 pm
