5.5mm x 38mm Torx Pan Self Drilling Screw DIN 7504MT | A2 Stainless Steel
| Quantity |
Unit Price
(ex. VAT)
|
Unit Price
(inc. VAT)
|
|---|---|---|
| 500 - 1999 | £0.21 | £0.25 |
| 2000 - 4999 | £0.15 | £0.18 |
| 5000 + | £0.12 | £0.14 |
£0.25 / each
.png)
Product Specification
| Thread Size | 5.5mm |
| Thread Length | 38mm |
| Drive | TX25 |
| Head Diameter | 11.0mm |
| Head Height | 4.0mm |
| Material | A2 Stainless Steel |
| Standard | DIN 7504MT |
Frequently Bought Together
Total Price: £0.00
5.5mm x 38mm Torx Pan Head Self Drilling Screw | DIN 7504MT | A2 Stainless Steel
Designed for sheet metal fabrication and light-gauge steel assemblies, this 5.5mm x 38mm pan head self drilling screw combines an integrated drill point with a self-tapping thread. The rounded pan head gives a neat installed finish while its flat underside provides a broad bearing surface against the fixed component. The A2 Stainless Steel construction provides good corrosion resistance for general engineering, fabrication and suitable exposed applications.
What Are Pan Head Self Drilling Screws?
Pan Head Self Drilling Screws combine a drill point and self-tapping thread in one fastener. The point cuts through compatible sheet metal before the threaded section forms a mating thread, allowing the screw to drill and fasten during the same operation in suitable materials. DIN 7504MT specifies a pan head self drilling screw with a Torx or hexalobular recess.
Common Applications
- Sheet Metal Fabrication: Joins overlapping sheets, lightweight sections, covers and fabricated metal components.
- Electrical Enclosures: Secures panels, access covers, mounting plates and internal brackets in suitable enclosures.
- HVAC and Ventilation: Fastens ducting, vents, air-handling components and associated metal fittings.
- Machinery and Equipment: Provides a practical fixing for guards, casings, control panels and light equipment assemblies.
5.5mm x 38mm DIN 7504MT Pan Head Self Drilling Screw Dimensions
- Thread Size: 5.5mm
- Thread Length: 38mm
- Head Height: 4.0mm
- Head Diameter: 11.0mm
- Drive: TX25
- Standard: DIN 7504MT
- Material: A2 Stainless Steel
Key Benefits
- 11.0mm head diameter provides the bearing width beneath the rounded head.
- DIN 7504MT identifies the standard or drive format for this product.
- Self-tapping thread forms a mating thread as the screw is installed into compatible material.
- Rounded pan head creates a neat compact finish where a countersunk recess is not required.
See our wider Pan Head Self Drilling Screws category for alternative standards and drive types. We also stock other self-drilling and self-threading fastening styles in our complete Self Drilling Screws range. For product-selection support, speak with our team on 01233 713581.
Fri 8.30 am - 3.30 pm
