4.8mm x 80mm Torx Pan Self Drilling Screw DIN 7504MT | A2 Stainless Steel
| Quantity |
Unit Price
(ex. VAT)
|
Unit Price
(inc. VAT)
|
|---|---|---|
| 500 - 1999 | £0.38 | £0.46 |
| 2000 - 4999 | £0.28 | £0.33 |
| 5000 + | £0.22 | £0.26 |
£0.46 / each
Product Specification
| Thread Size | 4.8mm |
| Thread Length | 80mm |
| Drive | TX25 |
| Head Diameter | 9.5mm |
| Head Height | 3.7mm |
| Material | A2 Stainless Steel |
| Standard | DIN 7504MT |
Frequently Bought Together
Total Price: £0.00
4.8mm x 80mm Torx Pan Head Self Drilling Screw | DIN 7504MT | A2 Stainless Steel
This 4.8mm x 80mm Torx pan head self drilling screw is designed to drill, form a mating thread and fasten into compatible metal in one installation process. The hardened drill-shaped point helps reduce the need for a separate pilot hole in suitable sheet metal, brackets, panels and fabricated components. The A2 Stainless Steel construction provides good corrosion resistance for general engineering, fabrication and suitable exposed applications.
What Are Pan Head Self Drilling Screws?
Pan Head Self Drilling Screws combine a drill point and self-tapping thread in one fastener. The point cuts through compatible sheet metal before the threaded section forms a mating thread, allowing the screw to drill and fasten during the same operation in suitable materials. DIN 7504MT specifies a pan head self drilling screw with a Torx or hexalobular recess.
Common Applications
- Automotive and Transport: Secures compatible trim panels, brackets, housings and lightweight fabricated components.
- General Construction: Fastens suitable metal framing accessories, brackets, fixtures and sheet-metal components.
- Control Panels: Provides a quick fixing for covers, mounting plates and internal hardware on compatible metal panels.
- Workshop Fabrication: Supports repairs, prototype work and general assembly where self drilling into suitable metal is useful.
4.8mm x 80mm DIN 7504MT Pan Head Self Drilling Screw Dimensions
- Thread Size: 4.8mm
- Thread Length: 80mm
- Head Height: 3.7mm
- Head Diameter: 9.5mm
- Drive: TX25
- Standard: DIN 7504MT
- Material: A2 Stainless Steel
Key Benefits
- TX25 drive matches the specified driver or bit for installation.
- A2 Stainless Steel construction provides the specified material and finish for the application.
- Flat underside of the pan head provides a broad clamping surface against panels and brackets.
- 4.8mm thread diameter with 80mm thread length provides the main screw dimensions.
See our wider Pan Head Self Drilling Screws category for alternative standards and drive types. We also stock other self-drilling and self-threading fastening styles in our complete Self Drilling Screws range. For product-selection support, speak with our team on 01233 713581.
Fri 8.30 am - 3.30 pm