4.2mm x 25mm Torx Pan Head Self Drilling Screw DIN 7504N | Steel BZP
| Quantity |
Unit Price
(ex. VAT)
|
Unit Price
(inc. VAT)
|
|---|---|---|
| 1000 - 1999 | £0.06 | £0.07 |
| 2000 - 4999 | £0.05 | £0.06 |
| 5000 + | £0.03 | £0.04 |
£0.07 / each
Product Specification
| Thread Size | 4.2mm |
| Thread Length | 25mm |
| Drive | T20 |
| Head Diameter | 8.0mm |
| Head Height | 3.1mm |
| Material | Steel BZP |
| Standard | DIN 7504N |
Frequently Bought Together
Total Price: £0.00
4.2mm x 25mm Torx Pan Head Self Drilling Screw | DIN 7504N | Steel BZP
Providing drilling and fastening in one operation, this 4.2mm x 25mm pan head self drilling screw is suited to sheet metal fabrication and light-gauge steel assemblies. Its T20 drive, 8.0mm head diameter and 3.1mm head height provide the key installation dimensions for this fastener. The zinc-plated steel construction provides a practical finish for general indoor and protected engineering applications.
What Are Pan Head Self Drilling Screws?
Pan Head Tek Screws are self drilling fasteners commonly used for metal-to-metal fixing. Their integrated drill point can remove separate drilling and tapping stages in many suitable applications while the drive recess allows installation with a compatible manual or powered driver. DIN 7504N defines the pan head self drilling screw format used for this metric fastening option.
Common Applications
- Metal Brackets: Fastens brackets and support fittings to compatible sheet or light-gauge metal sections.
- Equipment Covers: Secures removable covers and access panels where a pan head provides a broad bearing surface.
- Signage and Displays: Provides a neat fixing for suitable metal signs, frames and display components.
- Light Engineering: Supports general non-critical assembly of compatible metal parts and fabricated components.
4.2mm x 25mm DIN 7504N Pan Head Self Drilling Screw Dimensions
- Thread Size: 4.2mm
- Thread Length: 25mm
- Head Height: 3.1mm
- Head Diameter: 8.0mm
- Drive: T20
- Standard: DIN 7504N
- Material: Steel BZP
Key Benefits
- Self-tapping thread forms a mating thread as the screw is installed into compatible material.
- Rounded pan head creates a neat compact finish where a countersunk recess is not required.
- 8.0mm head diameter provides the bearing width beneath the rounded head.
- DIN 7504N identifies the standard or drive format for this product.
See our wider Pan Head Self Drilling Screws category for alternative standards and drive types. We also stock other self-drilling and self-threading fastening styles in our complete Self Drilling Screws range. For product-selection support, speak with our team on 01233 713581.
Fri 8.30 am - 3.30 pm
