M45 (280mm Height) Telescopic Thread Protection Nut & Washer Cap (DIN 125) - For 92mm Washer | Black LDPE
| Quantity |
Unit Price
(ex. VAT)
|
Unit Price
(inc. VAT)
|
|---|---|---|
| 1 - 49 | £14.47 | £17.37 |
| 50 - 99 | £13.92 | £16.70 |
| 100 - 249 | £13.41 | £16.09 |
| 250 + | £13.16 | £15.79 |
Product Specification
| Thread Size | M45 |
| Nut Across Flats | 70mm |
| Inside Height | 280mm |
| Outside Diameter | 92.0mm |
| Washer Diameter | 88.0mm |
| Washer Thickness | 7.0mm |
| Material | LDPE |
| Telescopic | Yes |
| Lock Nut Suitable | Yes |
| Colour | Black |
Frequently Bought Together
Total Price: £0.00
M45 x 280mm Telescopic Thread Protection Nut and Washer Cap DIN 125 | 92.0mm OD | Black LDPE
Suitable for assemblies with larger exposed fastener lengths, this M45 telescopic fastener cap is designed to fit over the nut and washer while leaving enough space for the projecting stud.
A taller cap body is especially helpful on long bolt projections, where a standard DIN 125 washer cap may not fully cover the threaded section. This protects the thread from dirt ingress and accidental impact. The 7.0mm washer thickness detail should be checked against the assembly before ordering for the most secure fit.
What Are Telescopic Thread Protection Nut and Washer Caps?
This style of bolt projection cap is designed to snap over the hex nut and washer after tightening. The clamping edge sits beneath the nut chamfer while the ribbed interior helps hold the cap securely in place.
Common Applications
- Finishing workshop fabricated frames
- Protecting test rig fasteners
- Covering long studs on jigs and fixtures
- Improving repeated assembly presentation
M45 x 280mm Telescopic Nut and Washer Cap DIN 125 Dimensions
- Thread Size: M45
- Nut Across Flats: 70mm
- Inside Height: 280mm
- Outside Diameter: 92.0mm
- Washer Diameter: 88mm
- Washer Thickness: 7.0mm
- Telescopic: Yes
- Lock Nut Suitable: Yes
- Material: LDPE
- Colour: Black
Related Thread Protection Caps
View our full Telescopic Thread Protection Nut and Washer Caps DIN 125 range for additional thread sizes, heights and washer coverage options.
Product Support and Trade Orders
When the stud projection is difficult to measure or the assembly uses mixed washer sizes, our team can help narrow down the correct cap. You can reach us on 01233 713581.
Fri 8.30 am - 3.30 pm