5.1 x 20 mm Natural Nylon Flanged Bushing
| Quantity |
Unit Price
(ex. VAT)
|
Unit Price
(inc. VAT)
|
|---|---|---|
| 1 - 24 | £0.25 | £0.30 |
| 25 - 49 | £0.23 | £0.27 |
| 50 - 99 | £0.20 | £0.24 |
| 100 - 249 | £0.17 | £0.21 |
| 250 - 499 | £0.15 | £0.18 |
| 500 - 999 | £0.13 | £0.16 |
| 1000 + | £0.12 | £0.14 |
£0.30 / each
.png)
Product Specification
| Internal Diameter | 5.1mm |
| Outside Diameter | 8.0mm |
| Flange Diameter | 14.0mm |
| Shaft Length | 18.5mm |
| Colour | Natural |
| Flange Thickness | 1.5mm |
| Material | Polyamide |
Frequently Bought Together
Total Price: £0.00
5.1mm ID x 8mm OD Nylon Flanged Bushing | 18.5mm Shaft | Natural
Designed to separate and protect components in electrical fastener insulation, this Nylon Flanged Bushing uses a 5.1mm bore with a 8.0mm outside diameter. The sleeve helps isolate the passing component while the flange creates a wider contact face at the panel or mounting surface.
What Are Nylon Flanged Bushes?
A Nylon Shoulder Bushing uses a cylindrical sleeve to pass through a hole with a flange that remains on the surface. This geometry allows the bush to insulate a compatible fastener, provide a controlled spacing point and help absorb light vibration or movement within the assembly.
Common Applications
- Automotive Electrical Systems: Provides non-conductive separation around suitable fasteners used in vehicle electrical and electronic assemblies.
- Equipment Housings: Provides an insulating bush through suitable holes in machinery covers, enclosures and equipment panels.
- Control Panels: Insulates compatible fasteners and mounting points in electrical control equipment and enclosure assemblies.
- Panel Protection: Provides a sleeve around a mounting hole which can help protect the hole edge from the passing screw or shaft.
5.1mm ID Nylon Flanged Bushing Dimensions
- Internal Diameter: 5.1mm
- Outside Diameter: 8.0mm
- Flange Diameter: 14.0mm
- Shaft Length: 18.5mm
- Flange Thickness: 1.5mm
- Colour: Natural
- Material: Polyamide
Key Benefits
- 14.0mm flange diameter creates a wider bearing surface against the panel or component.
- 1.5mm flange thickness provides the specified flange profile for this SKU.
- Nylon construction can help damp light vibration, movement and shock between assembled components.
- 5.1mm internal diameter provides the bore size for the compatible screw, pin or passing component.
Browse the full Nylon Bushes, Screw Insulators and Shoulder Washers range for additional sizes in Black and Natural finishes. Technical sizing support is available on 01233 713581.
Fri 8.30 am - 3.30 pm
