8.1 x 10 mm Natural Nylon Flanged Bushing
| Quantity |
Unit Price
(ex. VAT)
|
Unit Price
(inc. VAT)
|
|---|---|---|
| 1 - 24 | £0.26 | £0.31 |
| 25 - 49 | £0.23 | £0.28 |
| 50 - 99 | £0.21 | £0.25 |
| 100 - 249 | £0.18 | £0.22 |
| 250 - 499 | £0.16 | £0.19 |
| 500 - 999 | £0.14 | £0.17 |
| 1000 + | £0.12 | £0.15 |
£0.31 / each
.png)
Product Specification
| Internal Diameter | 8.1mm |
| Outside Diameter | 11.0mm |
| Flange Diameter | 20.0mm |
| Shaft Length | 8.0mm |
| Colour | Natural |
| Flange Thickness | 2.0mm |
| Material | Polyamide |
Frequently Bought Together
Total Price: £0.00
8.1mm ID x 11mm OD Nylon Flanged Bushing | 8mm Shaft | Natural
For sensor housings and electronic modules, this Nylon Screw Insulator provides a 8.1mm bore, 11.0mm body diameter and 8.0mm shaft length. The flanged Polyamide/Nylon construction creates a protective barrier around suitable threaded fasteners and can also act as a lightweight spacer between components.
What Are Nylon Flanged Bushes?
Nylon Flanged Bushings provide a lightweight alternative to metal bushes where electrical isolation and low-friction separation are important. They are commonly used around screws and fasteners, through panels and within PCB or electronic assemblies where the sleeve and flange help locate and insulate the connection.
Common Applications
- PCB Spacing: Helps maintain separation between circuit boards, panels and supporting components where a flanged spacer is suitable.
- Vibration Damping: Helps reduce direct contact and absorb light vibration or movement between assembled components.
- Component Spacing: Maintains a defined gap between compatible parts where the flanged shoulder provides a controlled bearing surface.
- Light Mechanical Assemblies: Acts as a low-mass sleeve or shoulder spacer around compatible shafts, pins and fasteners.
8.1mm ID Nylon Flanged Bushing Dimensions
- Internal Diameter: 8.1mm
- Outside Diameter: 11.0mm
- Flange Diameter: 20.0mm
- Shaft Length: 8.0mm
- Flange Thickness: 2.0mm
- Colour: Natural
- Material: Polyamide
Key Benefits
- Natural finish provides a neutral appearance that suits internal electrical and engineering assemblies.
- 8.1mm internal diameter provides the bore size for the compatible screw, pin or passing component.
- 8.0mm shaft length defines the depth of the insulating sleeve through the assembly.
- Flanged shoulder design supports both insulation and component spacing within one moulded part.
See alternative flanged bush sizes in the Nylon Bushes category. If you need help selecting an insulating bush for a screw, panel or PCB assembly, call Vital Parts on 01233 713581.
Fri 8.30 am - 3.30 pm
