8.1 x 5 mm Natural Nylon Flanged Bushing
| Quantity |
Unit Price
(ex. VAT)
|
Unit Price
(inc. VAT)
|
|---|---|---|
| 1 - 24 | £0.24 | £0.29 |
| 25 - 49 | £0.22 | £0.26 |
| 50 - 99 | £0.19 | £0.23 |
| 100 - 249 | £0.17 | £0.20 |
| 250 - 499 | £0.15 | £0.18 |
| 500 - 999 | £0.13 | £0.16 |
| 1000 + | £0.12 | £0.14 |
£0.29 / each
.png)
Product Specification
| Internal Diameter | 8.1mm |
| Outside Diameter | 11.0mm |
| Flange Diameter | 20.0mm |
| Shaft Length | 3.0mm |
| Colour | Natural |
| Flange Thickness | 2.0mm |
| Material | Polyamide |
Frequently Bought Together
Total Price: £0.00
8.1mm ID x 11mm OD Nylon Flanged Bushing | 3mm Shaft | Natural
Used within general engineering and light mechanical assemblies, this Natural Nylon Bush provides a flanged insulating sleeve with a 3.0mm shaft length and 20.0mm flange diameter. The heat-stabilised Nylon 6/6 material is suited to electrical and mechanical assemblies where lightweight isolation and positioning are important.
What Are Nylon Flanged Bushes?
A Nylon Shoulder Bushing uses a cylindrical sleeve to pass through a hole with a flange that remains on the surface. This geometry allows the bush to insulate a compatible fastener, provide a controlled spacing point and help absorb light vibration or movement within the assembly.
Common Applications
- Vibration Damping: Helps reduce direct contact and absorb light vibration or movement between assembled components.
- Automotive Electrical Systems: Provides non-conductive separation around suitable fasteners used in vehicle electrical and electronic assemblies.
- Light Mechanical Assemblies: Acts as a low-mass sleeve or shoulder spacer around compatible shafts, pins and fasteners.
- Control Panels: Insulates compatible fasteners and mounting points in electrical control equipment and enclosure assemblies.
8.1mm ID Nylon Flanged Bushing Dimensions
- Internal Diameter: 8.1mm
- Outside Diameter: 11.0mm
- Flange Diameter: 20.0mm
- Shaft Length: 3.0mm
- Flange Thickness: 2.0mm
- Colour: Natural
- Material: Polyamide
Key Benefits
- 11.0mm outside diameter provides the main sleeve diameter for the mounting hole.
- 3.0mm shaft length defines the depth of the insulating sleeve through the assembly.
- Flanged shoulder design supports both insulation and component spacing within one moulded part.
- Suitable as a screw insulator, shoulder washer or flanged spacer in correctly sized assemblies.
Compare other dimensions and colours in the Vital Parts Nylon Bushes range. For support matching the internal diameter, outside diameter or shaft length to your application, speak with our team on 01233 713581.
Fri 8.30 am - 3.30 pm
