4.2mm x 16mm Phillips Pan Head Self Drilling Screw (PH2) DIN 7504MH | A2 Stainless Steel
| Quantity |
Unit Price
(ex. VAT)
|
Unit Price
(inc. VAT)
|
|---|---|---|
| 1000 - 1999 | £0.06 | £0.07 |
| 2000 - 4999 | £0.04 | £0.05 |
| 5000 + | £0.03 | £0.04 |
£0.07 / each
.png)
Product Specification
| Thread Size | 4.2mm |
| Thread Length | 16mm |
| Drive | PH2 |
| Head Diameter | 8.0mm |
| Head Height | 3.1mm |
| Material | A2 Stainless Steel |
| Standard | DIN 7504MH |
Frequently Bought Together
Total Price: £0.00
4.2mm x 16mm Phillips Pan Head Self Drilling Screw | DIN 7504MH | A2 Stainless Steel
Designed for electrical enclosures, access panels and mounting brackets, this 4.2mm x 16mm pan head self drilling screw combines an integrated drill point with a self-tapping thread. The rounded pan head gives a neat installed finish while its flat underside provides a broad bearing surface against the fixed component. The A2 Stainless Steel construction provides good corrosion resistance for general engineering, fabrication and suitable exposed applications.
What Are Pan Head Self Drilling Screws?
Pan Head Self Drilling Screws combine a drill point and self-tapping thread in one fastener. The point cuts through compatible sheet metal before the threaded section forms a mating thread, allowing the screw to drill and fasten during the same operation in suitable materials. DIN 7504MH specifies a pan head self drilling screw with a Phillips recess.
Common Applications
- Metal Brackets: Fastens brackets and support fittings to compatible sheet or light-gauge metal sections.
- Equipment Covers: Secures removable covers and access panels where a pan head provides a broad bearing surface.
- Signage and Displays: Provides a neat fixing for suitable metal signs, frames and display components.
- Light Engineering: Supports general non-critical assembly of compatible metal parts and fabricated components.
4.2mm x 16mm DIN 7504MH Pan Head Self Drilling Screw Dimensions
- Thread Size: 4.2mm
- Thread Length: 16mm
- Head Height: 3.1mm
- Head Diameter: 8.0mm
- Drive: PH2
- Standard: DIN 7504MH
- Material: A2 Stainless Steel
Key Benefits
- 3.1mm head height gives the stated pan-head profile.
- PH2 drive matches the specified driver or bit for installation.
- Integrated drill point can reduce separate pilot-drilling operations in suitable metal.
- Flat underside of the pan head provides a broad clamping surface against panels and brackets.
Compare more sizes in our Pan Head Self Drilling Screws range. You can compare other self-drilling and self-threading screw options in our full Self Drilling Screws collection. If you are unsure which standard or drive suits your application, contact our team on 01233 713581.
Fri 8.30 am - 3.30 pm
