4.2mm x 45mm Phillips Pan Head Self Drilling Screw (PH2) DIN 7504MH | A2 Stainless Steel
| Quantity |
Unit Price
(ex. VAT)
|
Unit Price
(inc. VAT)
|
|---|---|---|
| 500 - 1999 | £0.14 | £0.17 |
| 2000 - 4999 | £0.10 | £0.12 |
| 5000 + | £0.07 | £0.09 |
£0.17 / each
Product Specification
| Thread Size | 4.2mm |
| Thread Length | 45mm |
| Drive | PH2 |
| Head Diameter | 8.0mm |
| Head Height | 3.1mm |
| Material | A2 Stainless Steel |
| Standard | DIN 7504MH |
Frequently Bought Together
Total Price: £0.00
4.2mm x 45mm Phillips Pan Head Self Drilling Screw | DIN 7504MH | A2 Stainless Steel
For signage, light metalwork and panel fixing, this 4.2mm x 45mm Phillips self drilling screw can cut through compatible sheet metal before its thread engages the receiving material. This allows drilling and fastening to be completed with one fastener in many suitable assemblies. The A2 Stainless Steel construction provides good corrosion resistance for general engineering, fabrication and suitable exposed applications.
What Are Pan Head Self Drilling Screws?
Self Drilling Screws use a hardened drill-shaped point to penetrate suitable metal before the screw thread engages. Pan head versions are useful where a visible low-profile head and good clamping area are preferred over a countersunk finish. DIN 7504MH specifies a pan head self drilling screw with a Phillips recess.
Common Applications
- Metal Brackets: Fastens brackets and support fittings to compatible sheet or light-gauge metal sections.
- Equipment Covers: Secures removable covers and access panels where a pan head provides a broad bearing surface.
- Signage and Displays: Provides a neat fixing for suitable metal signs, frames and display components.
- Light Engineering: Supports general non-critical assembly of compatible metal parts and fabricated components.
4.2mm x 45mm DIN 7504MH Pan Head Self Drilling Screw Dimensions
- Thread Size: 4.2mm
- Thread Length: 45mm
- Head Height: 3.1mm
- Head Diameter: 8.0mm
- Drive: PH2
- Standard: DIN 7504MH
- Material: A2 Stainless Steel
Key Benefits
- Integrated drill point can reduce separate pilot-drilling operations in suitable metal.
- Flat underside of the pan head provides a broad clamping surface against panels and brackets.
- 3.1mm head height gives the stated pan-head profile.
- PH2 drive matches the specified driver or bit for installation.
View the full Pan Head Self Drilling Screws range to compare diameters, lengths, drive styles and materials. Check out our wider Self Drilling Screws range for other self-drilling and self-threading screw styles. If you need help choosing the correct screw for your material thickness, call us on 01233 713581.
Fri 8.30 am - 3.30 pm