5.5mm x 35mm Phillips Pan Head Self Drilling Screw DIN 7504MH | A2 Stainless Steel
| Quantity |
Unit Price
(ex. VAT)
|
Unit Price
(inc. VAT)
|
|---|---|---|
| 500 - 1999 | £0.68 | £0.82 |
| 2000 - 4999 | £0.49 | £0.59 |
| 5000 + | £0.38 | £0.46 |
£0.82 / each
Product Specification
| Thread Size | 5.5mm |
| Thread Length | 35mm |
| Drive | PH3 |
| Head Diameter | 11.0mm |
| Head Height | 4.0mm |
| Material | A2 Stainless Steel |
| Standard | DIN 7504MH |
Frequently Bought Together
Total Price: £0.00
5.5mm x 35mm Phillips Pan Head Self Drilling Screw | DIN 7504MH | A2 Stainless Steel
For general construction brackets and metal framing accessories, this 5.5mm x 35mm Phillips self drilling screw can cut through compatible sheet metal before its thread engages the receiving material. This allows drilling and fastening to be completed with one fastener in many suitable assemblies. The A2 Stainless Steel construction provides good corrosion resistance for general engineering, fabrication and suitable exposed applications.
What Are Pan Head Self Drilling Screws?
Self Drilling Screws use a hardened drill-shaped point to penetrate suitable metal before the screw thread engages. Pan head versions are useful where a visible low-profile head and good clamping area are preferred over a countersunk finish. DIN 7504MH specifies a pan head self drilling screw with a Phillips recess.
Common Applications
- Automotive and Transport: Secures compatible trim panels, brackets, housings and lightweight fabricated components.
- General Construction: Fastens suitable metal framing accessories, brackets, fixtures and sheet-metal components.
- Control Panels: Provides a quick fixing for covers, mounting plates and internal hardware on compatible metal panels.
- Workshop Fabrication: Supports repairs, prototype work and general assembly where self drilling into suitable metal is useful.
5.5mm x 35mm DIN 7504MH Pan Head Self Drilling Screw Dimensions
- Thread Size: 5.5mm
- Thread Length: 35mm
- Head Height: 4.0mm
- Head Diameter: 11.0mm
- Drive: PH3
- Standard: DIN 7504MH
- Material: A2 Stainless Steel
Key Benefits
- 5.5mm thread diameter with 35mm thread length provides the main screw dimensions.
- 11.0mm head diameter provides the bearing width beneath the rounded head.
- A2 Stainless Steel construction provides the specified material and finish for the application.
- Self-tapping thread forms a mating thread as the screw is installed into compatible material.
See our wider Pan Head Self Drilling Screws category for alternative standards and drive types. Check out our wider Self Drilling Screws range for other self-drilling and self-threading screw styles. For product-selection support, speak with our team on 01233 713581.
Fri 8.30 am - 3.30 pm
