4.8mm x 80mm Phillips Pan Head Self Drilling Screw DIN 7504MH | A2 Stainless Steel
| Quantity |
Unit Price
(ex. VAT)
|
Unit Price
(inc. VAT)
|
|---|---|---|
| 500 - 1999 | £0.42 | £0.50 |
| 2000 - 4999 | £0.30 | £0.36 |
| 5000 + | £0.23 | £0.28 |
£0.50 / each
Product Specification
| Thread Size | 4.8mm |
| Thread Length | 80mm |
| Drive | PH3 |
| Head Diameter | 9.5mm |
| Head Height | 3.7mm |
| Material | A2 Stainless Steel |
| Standard | DIN 7504MH |
Frequently Bought Together
Total Price: £0.00
4.8mm x 80mm Phillips Pan Head Self Drilling Screw | DIN 7504MH | A2 Stainless Steel
This 4.8mm x 80mm Phillips self drilling screw is suited to automotive trim, brackets and lightweight fabricated components where a pan head is preferred over a countersunk fixing. The slightly domed top gives a compact finish while the flat bearing face helps clamp panels, brackets and covers securely. The A2 Stainless Steel construction provides good corrosion resistance for general engineering, fabrication and suitable exposed applications.
What Are Pan Head Self Drilling Screws?
Pan Head Tek Screws are self drilling fasteners commonly used for metal-to-metal fixing. Their integrated drill point can remove separate drilling and tapping stages in many suitable applications while the drive recess allows installation with a compatible manual or powered driver. DIN 7504MH specifies a pan head self drilling screw with a Phillips recess.
Common Applications
- Sheet Metal Fabrication: Joins overlapping sheets, lightweight sections, covers and fabricated metal components.
- Electrical Enclosures: Secures panels, access covers, mounting plates and internal brackets in suitable enclosures.
- HVAC and Ventilation: Fastens ducting, vents, air-handling components and associated metal fittings.
- Machinery and Equipment: Provides a practical fixing for guards, casings, control panels and light equipment assemblies.
4.8mm x 80mm DIN 7504MH Pan Head Self Drilling Screw Dimensions
- Thread Size: 4.8mm
- Thread Length: 80mm
- Head Height: 3.7mm
- Head Diameter: 9.5mm
- Drive: PH3
- Standard: DIN 7504MH
- Material: A2 Stainless Steel
Key Benefits
- 9.5mm head diameter provides the bearing width beneath the rounded head.
- DIN 7504MH identifies the standard or drive format for this product.
- Self-tapping thread forms a mating thread as the screw is installed into compatible material.
- Rounded pan head creates a neat compact finish where a countersunk recess is not required.
Compare more sizes in our Pan Head Self Drilling Screws range. We also stock other self-drilling and self-threading fastening styles in our complete Self Drilling Screws range. If you are unsure which standard or drive suits your application, contact our team on 01233 713581.
Fri 8.30 am - 3.30 pm
