6.3mm x 70mm Phillips Pan Head Self Drilling Screw (PH3) DIN 7504MH | A2 Stainless Steel
| Quantity |
Unit Price
(ex. VAT)
|
Unit Price
(inc. VAT)
|
|---|---|---|
| 200 - 1999 | £0.59 | £0.71 |
| 2000 - 4999 | £0.42 | £0.50 |
| 5000 + | £0.33 | £0.39 |
£0.71 / each
Product Specification
| Thread Size | 6.3mm |
| Thread Length | 70mm |
| Drive | PH3 |
| Head Diameter | 12.0mm |
| Head Height | 4.6mm |
| Material | A2 Stainless Steel |
| Standard | DIN 7504MH |
Frequently Bought Together
Total Price: £0.00
6.3mm x 70mm Phillips Pan Head Self Drilling Screw | DIN 7504MH | A2 Stainless Steel
Designed for automotive trim, brackets and lightweight fabricated components, this 6.3mm x 70mm pan head self drilling screw combines an integrated drill point with a self-tapping thread. The rounded pan head gives a neat installed finish while its flat underside provides a broad bearing surface against the fixed component. The A2 Stainless Steel construction provides good corrosion resistance for general engineering, fabrication and suitable exposed applications.
What Are Pan Head Self Drilling Screws?
Self Drilling Screws use a hardened drill-shaped point to penetrate suitable metal before the screw thread engages. Pan head versions are useful where a visible low-profile head and good clamping area are preferred over a countersunk finish. DIN 7504MH specifies a pan head self drilling screw with a Phillips recess.
Common Applications
- Sheet Metal Fabrication: Joins overlapping sheets, lightweight sections, covers and fabricated metal components.
- Electrical Enclosures: Secures panels, access covers, mounting plates and internal brackets in suitable enclosures.
- HVAC and Ventilation: Fastens ducting, vents, air-handling components and associated metal fittings.
- Machinery and Equipment: Provides a practical fixing for guards, casings, control panels and light equipment assemblies.
6.3mm x 70mm DIN 7504MH Pan Head Self Drilling Screw Dimensions
- Thread Size: 6.3mm
- Thread Length: 70mm
- Head Height: 4.6mm
- Head Diameter: 12.0mm
- Drive: PH3
- Standard: DIN 7504MH
- Material: A2 Stainless Steel
Key Benefits
- Integrated drill point can reduce separate pilot-drilling operations in suitable metal.
- Flat underside of the pan head provides a broad clamping surface against panels and brackets.
- 4.6mm head height gives the stated pan-head profile.
- PH3 drive matches the specified driver or bit for installation.
View the full Pan Head Self Drilling Screws range to compare diameters, lengths, drive styles and materials. We also stock other self-drilling and self-threading fastening styles in our complete Self Drilling Screws range. If you need help choosing the correct screw for your material thickness, call us on 01233 713581.
Fri 8.30 am - 3.30 pm
