3.5mm x 16mm Torx Pan Head Self Drilling Screw (T10) DIN 7504MT | A2 Stainless Steel
| Quantity |
Unit Price
(ex. VAT)
|
Unit Price
(inc. VAT)
|
|---|---|---|
| 1000 - 1999 | £0.07 | £0.09 |
| 2000 - 4999 | £0.05 | £0.06 |
| 5000 + | £0.04 | £0.05 |
£0.09 / each
.png)
Product Specification
| Thread Size | 3.5mm |
| Thread Length | 16mm |
| Drive | T10 |
| Head Diameter | 7.0mm |
| Head Height | 2.6mm |
| Material | A2 Stainless Steel |
| Standard | DIN 7504MT |
Frequently Bought Together
Total Price: £0.00
3.5mm x 16mm Torx Pan Head Self Drilling Screw | DIN 7504MT | A2 Stainless Steel
This 3.5mm x 16mm Torx pan head self drilling screw is designed to drill, form a mating thread and fasten into compatible metal in one installation process. The hardened drill-shaped point helps reduce the need for a separate pilot hole in suitable sheet metal, brackets, panels and fabricated components. The A2 Stainless Steel construction provides good corrosion resistance for general engineering, fabrication and suitable exposed applications.
What Are Pan Head Self Drilling Screws?
Pan Head Self Drilling Screws combine a drill point and self-tapping thread in one fastener. The point cuts through compatible sheet metal before the threaded section forms a mating thread, allowing the screw to drill and fasten during the same operation in suitable materials. DIN 7504MT specifies a pan head self drilling screw with a Torx or hexalobular recess.
Common Applications
- Automotive and Transport: Secures compatible trim panels, brackets, housings and lightweight fabricated components.
- General Construction: Fastens suitable metal framing accessories, brackets, fixtures and sheet-metal components.
- Control Panels: Provides a quick fixing for covers, mounting plates and internal hardware on compatible metal panels.
- Workshop Fabrication: Supports repairs, prototype work and general assembly where self drilling into suitable metal is useful.
3.5mm x 16mm DIN 7504MT Pan Head Self Drilling Screw Dimensions
- Thread Size: 3.5mm
- Thread Length: 16mm
- Head Height: 2.6mm
- Head Diameter: 7.0mm
- Drive: TX10
- Standard: DIN 7504MT
- Material: A2 Stainless Steel
Key Benefits
- Self-tapping thread forms a mating thread as the screw is installed into compatible material.
- Rounded pan head creates a neat compact finish where a countersunk recess is not required.
- 7.0mm head diameter provides the bearing width beneath the rounded head.
- DIN 7504MT identifies the standard or drive format for this product.
See our wider Pan Head Self Drilling Screws category for alternative standards and drive types. Check out our wider Self Drilling Screws range for other self-drilling and self-threading screw styles. For product-selection support, speak with our team on 01233 713581.
Fri 8.30 am - 3.30 pm
