3.9mm x 45mm Torx Pan Self Drilling Screw DIN 7504MT | A2 Stainless Steel
| Quantity |
Unit Price
(ex. VAT)
|
Unit Price
(inc. VAT)
|
|---|---|---|
| 500 - 1999 | £0.15 | £0.18 |
| 2000 - 4999 | £0.11 | £0.13 |
| 5000 + | £0.08 | £0.10 |
£0.18 / each
Product Specification
| Thread Size | 3.9mm |
| Thread Length | 45mm |
| Drive | TX15 |
| Head Diameter | 7.5mm |
| Head Height | 2.8mm |
| Material | A2 Stainless Steel |
| Standard | DIN 7504MT |
Frequently Bought Together
Total Price: £0.00
3.9mm x 45mm Torx Pan Head Self Drilling Screw | DIN 7504MT | A2 Stainless Steel
This 3.9mm x 45mm Torx self drilling screw is suited to general construction brackets and metal framing accessories where a pan head is preferred over a countersunk fixing. The slightly domed top gives a compact finish while the flat bearing face helps clamp panels, brackets and covers securely. The A2 Stainless Steel construction provides good corrosion resistance for general engineering, fabrication and suitable exposed applications.
What Are Pan Head Self Drilling Screws?
Pan Head Tek Screws are self drilling fasteners commonly used for metal-to-metal fixing. Their integrated drill point can remove separate drilling and tapping stages in many suitable applications while the drive recess allows installation with a compatible manual or powered driver. DIN 7504MT specifies a pan head self drilling screw with a Torx or hexalobular recess.
Common Applications
- Automotive and Transport: Secures compatible trim panels, brackets, housings and lightweight fabricated components.
- General Construction: Fastens suitable metal framing accessories, brackets, fixtures and sheet-metal components.
- Control Panels: Provides a quick fixing for covers, mounting plates and internal hardware on compatible metal panels.
- Workshop Fabrication: Supports repairs, prototype work and general assembly where self drilling into suitable metal is useful.
3.9mm x 45mm DIN 7504MT Pan Head Self Drilling Screw Dimensions
- Thread Size: 3.9mm
- Thread Length: 45mm
- Head Height: 2.8mm
- Head Diameter: 7.5mm
- Drive: TX15
- Standard: DIN 7504MT
- Material: A2 Stainless Steel
Key Benefits
- Rounded pan head creates a neat compact finish where a countersunk recess is not required.
- 2.8mm head height gives the stated pan-head profile.
- DIN 7504MT identifies the standard or drive format for this product.
- Integrated drill point can reduce separate pilot-drilling operations in suitable metal.
Browse the complete Pan Head Self Drilling Screw collection for other lengths, diameters and materials. You can compare other self-drilling and self-threading screw options in our full Self Drilling Screws collection. We can help you select the right fastener on 01233 713581.
Fri 8.30 am - 3.30 pm