4.8mm x 16mm Torx Pan Self Drilling Screw DIN 7504MT | A2 Stainless Steel
| Quantity |
Unit Price
(ex. VAT)
|
Unit Price
(inc. VAT)
|
|---|---|---|
| 500 - 1999 | £0.10 | £0.12 |
| 2000 - 4999 | £0.07 | £0.09 |
| 5000 + | £0.06 | £0.07 |
£0.12 / each
.png)
Product Specification
| Thread Size | 4.8mm |
| Thread Length | 16mm |
| Drive | TX25 |
| Head Diameter | 9.5mm |
| Head Height | 3.7mm |
| Material | A2 Stainless Steel |
| Standard | DIN 7504MT |
Frequently Bought Together
Total Price: £0.00
4.8mm x 16mm Torx Pan Head Self Drilling Screw | DIN 7504MT | A2 Stainless Steel
This 4.8mm x 16mm Torx self drilling screw is suited to control cabinets, electrical equipment and fabricated housings where a pan head is preferred over a countersunk fixing. The slightly domed top gives a compact finish while the flat bearing face helps clamp panels, brackets and covers securely. The A2 Stainless Steel construction provides good corrosion resistance for general engineering, fabrication and suitable exposed applications.
What Are Pan Head Self Drilling Screws?
Pan Head Self Drilling Screws combine a drill point and self-tapping thread in one fastener. The point cuts through compatible sheet metal before the threaded section forms a mating thread, allowing the screw to drill and fasten during the same operation in suitable materials. DIN 7504MT specifies a pan head self drilling screw with a Torx or hexalobular recess.
Common Applications
- Sheet Metal Fabrication: Joins overlapping sheets, lightweight sections, covers and fabricated metal components.
- Electrical Enclosures: Secures panels, access covers, mounting plates and internal brackets in suitable enclosures.
- HVAC and Ventilation: Fastens ducting, vents, air-handling components and associated metal fittings.
- Machinery and Equipment: Provides a practical fixing for guards, casings, control panels and light equipment assemblies.
4.8mm x 16mm DIN 7504MT Pan Head Self Drilling Screw Dimensions
- Thread Size: 4.8mm
- Thread Length: 16mm
- Head Height: 3.7mm
- Head Diameter: 9.5mm
- Drive: TX25
- Standard: DIN 7504MT
- Material: A2 Stainless Steel
Key Benefits
- A2 Stainless Steel construction provides the specified material and finish for the application.
- Self-tapping thread forms a mating thread as the screw is installed into compatible material.
- 4.8mm thread diameter with 16mm thread length provides the main screw dimensions.
- 9.5mm head diameter provides the bearing width beneath the rounded head.
Browse the complete Pan Head Self Drilling Screw collection for other lengths, diameters and materials. You can compare other self-drilling and self-threading screw options in our full Self Drilling Screws collection. We can help you select the right fastener on 01233 713581.
Fri 8.30 am - 3.30 pm